<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: Arial; font-size: 10pt; color: #000000'><br><br>----- Original Message -----<br>From: "Tzafrir Cohen" <tzafrir.cohen@xorcom.com><br>To: asterisk-users@lists.digium.com<br>Sent: Thursday, 4 December, 2008 12:01:54 GMT +00:00 GMT Britain, Ireland, Portugal<br>Subject: Re: [asterisk-users] BT - ISDN30 - International Calls not working, everything else is fine :(<br><br>On Thu, Dec 04, 2008 at 11:49:50AM +0000, Mr Gabriel wrote:<br>> Dear All, <br>> <br>> Thank you for taking the time to read this post - I am *confused!* as to why my asterisk setup does not work as it should. I have an ISDN 30 connection for telephony, a Sangoma card, and asterisk installed. <br>> <br>> Incoming calls, and outgoing calls work 100%. Making an international call, results in silence, or the error message all circuits are busy <br>> <br>> Numbers being passed to the trunk for the call <br>> <br>> • National is 020xxxxxxxx will result in 20xxxxxxxx being sent and dialled, which works <br>> • Mobile is 07xxxxxxxxx will result in 7xxxxxxxxx being sent and dialled, which works <br>> • International 00x[any number of digits] will result in 00x[any number of digits] which does not work <br>> <br>> I do not see why this does not work. I do know that for every call, the flag sent is national - how can I make sure the correct flag is sent for the call? By flag, I mean the TON, (type of number) <br>> <br>> Any assistance will be greatly appreciated. <br><br>Look into pridialplan in zapata.conf / chan_dahdi.conf . <br><br>I'm not sure if 'pridialplan = unknown' is applicable. If not: something<br>of the sort of internationalprefixx should help.<br><br><br><br>"Gabriel Says"<br><br>The pridialplan is set to pridialplan=unknown, and internationalprefix=00, I have rebooted a few times, so I know this is what is currently loaded. I am using freepbx as a web interface, is it possible that there are conflicting settings?<br></div></body></html>