<div dir="ltr">On Box C, you define your IAX peers A and B in iax.conf. For your peer "Box A", no special config is needed, it will use the default port 4569. For the configuration entry for Box B, you add a line to the peer definition that reads "port=4570". Box C will then try to reach Box B via port 4570.<br>
<br>On your DSL router, any traffic arriving on port 4569 is destined for Box A, anything arriving on port 4570 is for Box B. You will therefore need to set up port forwarding on the router. Incoming traffic on port 4569 (UDP) gets forwarded to Box A, port 4569. Anything arriving on port 4570 you can forward to Box B, port 4569. That will do the trick.<br>
<br><div class="gmail_quote">On Fri, Jul 25, 2008 at 4:15 PM, bilal ghayyad <span dir="ltr"><<a href="mailto:bilmar_gh@yahoo.com">bilmar_gh@yahoo.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Again, I did not understand.<br>
<br>
How the router will know if the call that came from Asterisk Box C need to be routed for Asterisk Box A or Asterisk Box B?<br>
<br>
Note: Asterisk A and B both behind DSL router, while Asterisk C in remote side, both sides are connected via Internet.<br>
</blockquote></div><br>
</div>