<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Tzafrir Cohen wrote:
<blockquote cite="mid:20080416145904.GZ20315@xorcom.com" type="cite">
<pre wrap="">On Wed, Apr 16, 2008 at 09:44:25AM -0500, Brent Davidson wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Alex Balashov wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Greetings,
This may have already been asked many times, but I cannot seem to find a
satisfactory and consistent answer anywhere.
I have an X100P card (from x100p.com) installed in a Dell PowerEdge 2850
or 2650 (cannot recall):
00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:04.0 Class ff00: Dell Embedded Remote Access or ERA/O
00:04.1 Class ff00: Dell Remote Access Card III
00:04.2 Class ff00: Dell Embedded Remote Access: BMC/SMIC device
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
01:06.0 Communication controller: Motorola Wildcard X100P
03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
03:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
04:08.0 PCI bridge: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge (rev 01)
04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller
3/Di (rev 01)
But, wcfxo won't recognise it:
NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:01:06.0 failed with error -5
This is running on a custom-compiled kernel 2.6.24.3 with Asterisk
1.4.18 and Zaptel 1.4.10.
Any ideas?
-- Alex
</pre>
</blockquote>
<pre wrap="">Is that a genuine X100P or a clone? Looks like a modem that has been
made to look like an X100P.
</pre>
</blockquote>
<pre wrap=""><!---->
What's the difference?</pre>
</blockquote>
<br>
There are some driver peculiarities with some of the Modem-based
X100P's that cause them to not be detected correctly by wcfxo.<br>
<br>
-Brent<br>
</body>
</html>