Holy Mackeral. Ignore that last message. I still do NOT know how to route calls with the same extension being used in two locations, however the issue I've resolved is getting Cisco CallManager and Asterisk talking together properly.<br>
<br>Sorry folks AGAIN.<br><br>So if anybody has ideas on how to have extension 2000 in two places I'd appreciate the advice! Thanks!<br><br><br><div class="gmail_quote">On Thu, Mar 20, 2008 at 7:14 AM, Aaron Fransen <<a href="mailto:aaron.fransen@gmail.com">aaron.fransen@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Must be having a "DOH!" week.<br><br>Problem turned out to be the Fedora core firewall that was turned on. <br>
<br>Sorry folks.<div><div></div><div class="Wj3C7c"><br><br><div class="gmail_quote">On Wed, Mar 19, 2008 at 3:01 PM, Aaron Fransen <<a href="mailto:aaron.fransen@gmail.com" target="_blank">aaron.fransen@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><br>Finally got my Cisco Call Manager link going; what it turned out to be was having the same extension on the Asterisk system and on the Call Manager side of things. Changing the extension on one side fixed it. Which brings me to...<br>
<br>I need to have the same extensions on two sites. So if I use an 8bbbeeee dialing plan (8, then bbb location, then eeee extension), site 1 might dial:<br><br>8-099-2000<br><br>Site 2 might dial: 8-101-2000<br><br>A 2000 extension exists on both sides, however Asterisk doesn't seem to like it and drops the call before it even hits the logging facility and send a busy signal back to the caller.<br>
<br>I've tried a dialing plan like:<br><br>exten => _8101XXXX,1,Dial(SIP/${EXTEN:4},,r)<br><br>to no avail.<br><br>Thoughts everyone?<br>
</blockquote></div><br>
</div></div></blockquote></div><br>