<br>Finally got my Cisco Call Manager link going; what it turned out to be was having the same extension on the Asterisk system and on the Call Manager side of things. Changing the extension on one side fixed it. Which brings me to...<br>
<br>I need to have the same extensions on two sites. So if I use an 8bbbeeee dialing plan (8, then bbb location, then eeee extension), site 1 might dial:<br><br>8-099-2000<br><br>Site 2 might dial: 8-101-2000<br><br>A 2000 extension exists on both sides, however Asterisk doesn't seem to like it and drops the call before it even hits the logging facility and send a busy signal back to the caller.<br>
<br>I've tried a dialing plan like:<br><br>exten => _8101XXXX,1,Dial(SIP/${EXTEN:4},,r)<br><br>to no avail.<br><br>Thoughts everyone?<br>