Hi <br>i've installed this software:<br><br>******************** SOFTWARE
<br>mISDN-1_1_7
<br>mISDNuser-1_1_7
<br>Asterisk-1.4.15
<br>******************** SOFTWARE
<br>
<br>misdn is correctly loaded by misdn-inist start<br>
<br>Here there is the misdn.conf (copied from an existing and working installation with Asterisk 1.2.x and one BN8S0)
<br>
<br>
<br>******************** MISDN.CONF
<br>[general]
<br>misdn_init=/etc/misdn-init.conf
<br>debug=0
<br>bridging=no
<br>
<br>stop_tone_after_first_digit=yes
<br>append_digits2exten=yes
<br>dynamic_crypt=no
<br>crypt_prefix=**
<br>crypt_keys=test,muh
<br>jitterbuffer=4000
<br>jitterbuffer_upper_threshold=0
<br>context=misdn
<br>language=en
<br>musicclass=maracaibo
<br>senddtmf=yes
<br>far_alerting=no
<br>allowed_bearers=all
<br>nationalprefix=0
<br>internationalprefix=00
<br>rxgain=0
<br>txgain=0
<br>te_choose_channel=no
<br>pmp_l1_check=yes
<br>need_more_infos=no
<br>method=standard
<br>dialplan=0
<br>localdialplan=0
<br>cpndialplan=0
<br>early_bconnect=yes
<br>incoming_early_audio=no
<br>presentation=-1
<br>screen=-1
<br>echocancelwhenbridged=no
<br>jitterbuffer=4000
<br>jitterbuffer_upper_threshold=0
<br>
<br>hdlc=no
<br>
<br>[TEports]
<br>ports=1,2,3,4,5,6,7,8
<br>context=from-pstn
<br>msns=*
<br>
<br>******************** MISDN.CONF
<br>
<br>When i start asterisk i get tihis warning:<br>
<br>****************** ASTERISK CLI
<br>
<br>mISDN_close: fid(19) isize(131072) inbuf(0xb6fac008) irp(0xb6fac008)
iend(0xb6fac008)
<br> == Parsing '/etc/asterisk/misdn.conf': Found
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:929
_build_general_config: misdn.conf: "jitterbuffer=4000" (section:
general) invalid or out of range. Please edit your misdn.conf and then
do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:929
_build_general_config: misdn.conf: "jitterbuffer_upper_threshold=0"
(section: general) invalid or out of range. Please edit your misdn.conf
and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:985 _build_port_config:
misdn.conf: "echocancelwhenbridged=no" (section: default) invalid or out
of range. Please edit your misdn.conf and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=3,4,5,6,7,8" (section: TEports) invalid or out of
range. Please edit your misdn.conf and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=4,5,6,7,8" (section: TEports) invalid or out of
range. Please edit your misdn.conf and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=5,6,7,8" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=6,7,8" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=7,8" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=8" (section: TEports) invalid or out of range. Please
edit your misdn.conf and then do a "misdn reload".
<br>[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf : "ports=(null)" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
<br>P[ 0] Got: 1 from get_ports
<br>P[ 1] this is a unknown port type 0x00000000
<br> == Registered channel type 'mISDN' (Channel driver for mISDN Support
(Bri/Pri))
<br> == Registered application 'misdn_set_opt'
<br> == Registered application 'misdn_facility'
<br> == Registered application 'misdn_check_l2l1'
<br>P[ 0] -- mISDN Channel Driver Registered --
<br>chan_misdn.so => (Channel driver for mISDN Support (BRI/PRI))
<br>
<br>****************** ASTERISK CLI
<br>
<br>and in the kernel prints that in dmesg:<br>
<br>********* DMESG
<br>mISDN_dsp: Audio DSP Rev. 1.29 (debug=0x0) EchoCancellor MG2
dtmfthreshold(100)
<br>mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies.
<br>mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
<br>mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
<br>mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
<br>mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
<br>mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
<br>mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
<br>********* DMESG
<br>
<br>Can you help me to guess the problem?<br><br>Thanks<br clear="all"><br>-- <br>/*************/<br>nik600<br><a href="https://sourceforge.net/projects/ccmanager">https://sourceforge.net/projects/ccmanager</a><br><a href="https://sourceforge.net/projects/reportmaker">
https://sourceforge.net/projects/reportmaker</a><br><a href="https://sourceforge.net/projects/nikstresser">https://sourceforge.net/projects/nikstresser</a>