On 11/6/07, <b class="gmail_sendername">Stephen Bosch</b> <<a href="mailto:posting@vodacomm.ca">posting@vodacomm.ca</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
> It survives if it goes to a Telus customer, but not if it crosses over<br>> to Bell, Rogers, etc.<br><br>Well -- here's where you can help me, because our name info is not even<br>surviving on Telus' own network. I don't really care too much about Bell
<br>and Rogers, since Bell barely has a footprint out here and Rogers<br>doesn't provide CNAM on its mobile network anyway (and nobody is using<br>Rogers home phone ;) ).<br><br>So -- if you had it working on Telus, what did you do?
</blockquote><div><br>As soon as I turned on facilityenable=yes, outbound name display started to work for me.<br></div><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
> One tech claimed it was because I was sending calling name in addition<br>> to the IE,<br><br>He probably meant the Display IE *and* the Facility IE. If you see my<br>post it's what the technician I was working with suggested. Would be
<br>great if I knew a way of turning off the Display IE, if that's even<br>possible/allowed. If it's not, then the "don't send both" idea is wrong.</blockquote><div><br>Probably correct, as that's what I'm sending now:
<br><br>> [1c 15 9f 00 00 00 00 00 00 00 00 00 00 00 00 00 43 6f 6d 77 61 76 65]<br>> Facility (len=23, codeset=0) [ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 'Namehere']
<br>> [00 00 00 00 00 00 00 00 00 00 00]<br>> Display (len= 8) Charset: 31 [ Namehere ]<br><br>I just checked dialing out of and back into my system, and the Facility IE comes back in the SETUP message, but the Display IE does not.
<br></div><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Did you end up adding name records to the LIDB?</blockquote><div><br>For our purposes name display was a nice to have, so we didn't go down this path.
<br><br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Anyway -- again -- what did you do to get it working on Telus' network?<br>
Do you know what kind of switch you were connected to?</blockquote><div><br>To the best of my knowledge, we're connected to a 5ESS running NI-2.<br><br>Here's the relevant zapata bits I use:<br><br>facilityenable = yes
<br>pridialplan=unknown<br>priindication=outofband<br>overlapdial=no<br>resetinterval=86400<br>echocancel=yes<br>switchtype=national<br>signalling=pri_cpe<br>callerid=asreceived<br><br>Hope that helps.<br><br></div></div>
-- <br>j.