<br>Hello Fellows!<br><br>I have a TDM2400 and I can't put it to work. Every time it receive a call the Asterisk handle it and call the SIP phone; when people pick up the fone they don't hear nothing and the caller hear the phone rings and nothing happens. In Asterisk console I can see the message answered by the SIP's phone.
<br>I lost a lot of time trying to solve this problem without success :(.<br><br> == Starting post polarity CID detection on channel 21<br>
-- Starting simple switch on 'Zap/21-1'<br>
-- Executing [s@entrada:1] Answer("Zap/21-1", "") in new stack<br>
-- Executing [s@entrada:2] Dial("Zap/21-1", "SIP/ramal01&SIP/ramal02&SIP/ramal03|30|tT|r") in new stack<br>
-- Called ramal01<br>
-- Called ramal02<br>
-- Called ramal03<br>
-- SIP/ramal03-0070e020 is ringing<br>
-- SIP/ramal01-006fd4f0 is ringing<br>
-- SIP/ramal02-00705d70 is ringing<br>
-- SIP/ramal01-006fd4f0 answered Zap/21-1<br>
== Spawn extension (entrada, s, 2) exited non-zero on 'Zap/21-1'<br>
-- Hungup 'Zap/21-1' <br>
<br>
<br>I got the following message when a enable the usecallerid=yes: <br><br> Sep 29 16:48:31 WARNING[12369]: chan_zap.c:5961 ss_thread: DTMFCID timed out waiting for ring. Exiting simple switch<br> -- Hungup 'Zap/21-1'
<br> == Starting post polarity CID detection on channel 21<br> -- Starting simple switch on 'Zap/21-1'<br> Sep 29 16:48:35 WARNING[12372]: chan_zap.c:5961 ss_thread: DTMFCID timed out waiting for ring. Exiting simple switch
<br> -- Hungup 'Zap/21-1'<br><br><br><br>I've tested with the Zaptel 1.2/ Asterisk 1.2 and Zaptel <a href="http://1.4.5.1/Asterisk">1.4.5.1/Asterisk</a> 1.4.11 and got the same problem.<br>Debian Etch amd64.
<br><br>Thanks for any help!<br><br>Regards,<br><br>McCoy Silva<br><br>