I have the same setup asterisk-1.4.11 with TE120P two port E1 card with is connected with avaya system but signaling is Qsig becase i want unified dialplan<br><br>my configuration<br>/etc/zaptel.conf<br>########### Digium TE120P Card Configuration #########<br># E1 port 1<br>span=1,1,0,ccs,hdb3<br>bchan=1-15,17-31<br>dchan=16<br># E1 port 2<br>span=2,0,0,ccs,hdb3<br>bchan=32-46,48-62<br>dchan=47<br><br>loadzone = in<br>defaultzone=in<br><br><br>/etc/asterisk/zapata.conf<br>group=1<br>context=from-avaya<br>signalling=pri_net<br>channel => 1-15,17-31<br><br>group=2<br>context=from-pstn<br>signalling=pri_cpe<br>channel => 32-46,48-62<br><br><br>*Notes : - my avaya system clock is slave mode and my asterisk is master thats why i use pri_net on avaya<br><br><br><br><br><br><br><br><br><b><i>Vidura Senadeera <vidurased@gmail.com></i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">
<div>Dear All,</div> <div> </div> <div>I'm integrating avaya commuication manager difinity ver 1.0 with asterisk using B2B E1. following are the details of my H/W, zaptel configs and software installed.</div> <div> </div> <div>Digium TE110p</div> <div>asterisk 1.2.19</div> <div>cent OS 4.4</div> <div>zaptel 1.2.18</div> <div>libpri 1.2.4</div> <div> </div> <div>etc/zaptel.conf</div> <div>span=1,0,0,cas,hdb3</div> <div>bchan=1-15,17-31</div> <div>dchan=16</div> <div> </div> <div>when i ztcfg -vvv im having this error message and the E1 is not getting up.</div> <div> </div> <div>"cas signalling on span1 conflicts with HDLC with FCS on channel 16"</div> <div> </div> <div>The switchtype and signalling im using is national, pri_cpe</div> <div> </div> <div>I'm attaching the avaya config details for more information.</div> <div> </div> <div>Please help me to sorted out this problem.</div> <div> </div> <div>- <br>Thanks &
Regards,<br>Vidura Senadeera,<br>Sri Lanka.<br>Tel - +94114520036<br>Mobile - +94777766596<br> </div> SIGNALING GROUP<br><br> Group Number: 1 Group Type: isdn-pri<br> Associated Signaling? y Max number of NCA TSC: 0<br> Primary D-Channel: 01B0216 Max number of CA TSC: 0<br> Trunk Group for NCA TSC:<br> Trunk Group for Channel Selection: X-Mobility/Wireless Type: NONE<br> Supplementary Service Protocol: a<br><br><br> DS1 CIRCUIT PACK<br><br> Location: 01B02 Name: ZTE 1<br> Bit Rate: 2.048 Line Coding: hdb3<br><br> Signaling Mode: isdn-pri<br> Connect: network<br> TN-C7 Long Timers? n Country Protocol: 7<br>Interworking Message: PROGress<br>Interface Companding: alaw
CRC? n<br> Idle Code: 11111111<br> DCP/Analog Bearer Capability: 3.1kHz<br><br><br><br><br> Slip Detection? y Near-end CSU Type: other<br><br> Echo Cancellation? n<br><br><br> TRUNK GROUP<br><br>Group Number: 1 Group Type: isdn CDR Reports: y<br> Group Name: OUTSIDE CALL COR: 14 TN: 1 TAC: 801<br> Direction: two-way Outgoing Display? n Carrier Medium: PRI/BRI<br> Dial Access? y Busy Threshold: 99 Night Service:<br>Queue Length: 0<br>Service Type: public-ntwrk Auth Code? n TestCall ITC: rest<br> Far End Test Line No:<br>TestCall BCC: 4<br>TRUNK PARAMETERS<br> Codeset to Send Display: 6 Codeset to Send National IEs: 6<br> Max Message Size to Send: 260 Charge Advice: none<br> Supplementary Service
Protocol: a Digit Handling (in/out): enbloc/enbloc<br><br> Trunk Hunt: cyclical<br> Digital Loss Group: 13<br>Calling Number - Delete: Insert: Numbering Format:<br> Bit Rate: 1200 Synchronization: sync Duplex: full<br> Disconnect Supervision - In? y Out? n<br> Answer Supervision Timeout: 0<br><br><br>TRUNK FEATURES<br> ACA Assignment? n Measured: none Wideband Support? n<br> Maintenance Tests? y<br> Data Restriction? n NCA-TSC Trunk Member:<br> Send Name: n Send Calling Number: y<br> Used for DCS? n<br> Suppress # Outpulsing? n Numbering Format: public<br> Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider<br><br>
Replace Restricted Numbers? y<br> Replace Unavailable Numbers? y<br> Send Connected Number: y<br><br> Send UUI IE? y<br> Send UCID? n<br> Send Codeset 6/7 LAI IE? y Ds1 Echo Cancellation? n<br><br> US NI Delayed Calling Name Update? n<br><br> SBS? n Network (Japan) Needs Connect Before Disconnect? n<br> DS1 CIRCUIT PACK<br><br> Location: 01B01 Name: ZTE 4<br> Bit Rate: 2.048 Line Coding: hdb3<br><br> Signaling Mode: isdn-pri<br> Connect: network<br> TN-C7 Long Timers? n Country Protocol: 7<br>Interworking Message: PROGress<br>Interface Companding: alaw CRC? n<br> Idle Code: 11111111<br>
DCP/Analog Bearer Capability: 3.1kHz<br><br><br><br><br> Slip Detection? y Near-end CSU Type: other<br><br> Echo Cancellation? n<br><br><br>_______________________________________________<br>--Bandwidth and Colocation Provided by http://www.api-digital.com--<br><br>asterisk-users mailing list<br>To UNSUBSCRIBE or update options visit:<br> http://lists.digium.com/mailman/listinfo/asterisk-users</blockquote><br><BR><BR><p> 
<hr size=1>Choose the right car based on your needs.
Check out <a href="http://us.rd.yahoo.com/evt=48518/*http://autos.yahoo.com/carfinder/;_ylc=X3oDMTE3NWsyMDd2BF9TAzk3MTA3MDc2BHNlYwNtYWlsdGFncwRzbGsDY2FyLWZpbmRlcg-- ">Yahoo! Autos new Car Finder tool.</a>