<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1522" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>
<DIV><FONT face=Arial size=2>Dear users.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My current setup uses a euroISDN E1 with 8 cahnnels
for incoming and outgoing calls from a digium te110p.</FONT></DIV>
<DIV><FONT face=Arial size=2>Currently all phones use SIP.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>However, I need to add some faxes lines and some
POS credit card machines. These will require POTS lines with a fixed
DDI.</FONT></DIV>
<DIV><FONT face=Arial size=2>I have purchased the tdm400p and 4 FXS
modules.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My problem is with the zaptel.conf and
zapata.conf.</FONT></DIV>
<DIV><FONT face=Arial size=2>I am a little confused as how to separate the
specific requirements for each card.</FONT></DIV>
<DIV><FONT face=Arial size=2>How do I create a span for the
tdm400p?</FONT></DIV>
<DIV><FONT face=Arial size=2>I would imagine they require their own context and
specific group?</FONT></DIV>
<DIV><FONT face=Arial size=2>Also the channel numbers become a bit of a problem.
Do they become sequential carrying on from each card????</FONT></DIV>
<DIV><FONT face=Arial size=2>I would imagine I need to modprobe the correct
drivers for this card as well. Will there be any conflict?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here is my current zaptel and zapata confs with the
te110p requirements ONLY.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>zaptel:</FONT></DIV>
<DIV><FONT face=Arial size=2>loadzone = uk<BR>defaultzone = uk<BR>span =
1,0,0,ccs,hdb3,crc4<BR>bchan = 1-15,17-31<BR>dchan = 16</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>zapata:</FONT></DIV>
<DIV><FONT face=Arial
size=2>[channels]<BR>language=en<BR>usecallerid=yes<BR>hidecallerid=no<BR>callwaiting=no<BR>callwaitingcallerid=yes<BR>restrictcid=no<BR>usecallingpres=no<BR>threewaycalling=yes<BR>callreturn=yes<BR>transfer=yes<BR>cancallforward=yes<BR>echocancelwhenbridged=yes<BR>echocancel=yes<BR>musiconhold=default<BR>rxgain=0.0<BR>txgain=0.0<BR>signalling=pri_cpe<BR>switchtype=euroisdn<BR>immediate=no<BR>overlapdial=yes<BR>pridialplan=unknown<BR>prilocaldialplan=unknown</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>group=1<BR>context =
from-pstn<BR>callerid=asreceived<BR>channel => 1-8 </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Please would someone start me off in the right
direction for adding these additional FXS
devices.</FONT></DIV></FONT></DIV></FONT></DIV></BODY></HTML>