<div>Hi</div>
<div> </div>
<div>I have 100XP Digium clone card</div>
<div> </div>
<div>Installed in my pc</div>
<div> </div>
<div>and compiled zaptel and asterisk again after installing the card</div>
<div> </div>
<div>but after i rebooted</div>
<div> </div>
<div>i can load zaptel and wcfxo modprobe with out any problem</div>
<div> </div>
<div>but when i intiated ztcfg -vvvv</div>
<div> </div>
<div>i get the following error</div>
<div> </div>
<div> </div>
<div>Zaptel Configuration<br>======================</div>
<p><br>1 channels configured.</p>
<div>ZT_CHANCONFIG failed on channel 1: No such device or address (6)<br> </div>
<div> </div>
<div> </div>
<div>---------------------</div>
<div> </div>
<div>dmesg errors</div>
<div> </div>
<div>Zapata Telephony Interface Unloaded<br>Zapata Telephony Interface Registered on major 196<br>Zaptel Version: SVN-branch-1.2-r1725 Echo Canceller: KB1<br>Failed to initailize DAA, giving up...<br>wcfxo: probe of 0000:00:
10.0 failed with error -5<br> </div>
<div>--------------</div>
<div> </div>
<div>lspci</div>
<div> </div>
<div>00:0c.1 SCSI storage controller: Adaptec AIC-7896U2/7897U2<br>00:10.0 Communication controller: Motorola Unknown device 5608<br> </div>
<div> </div>
<div> </div>
<div>any suggestions</div>
<div> </div>
<div>ram</div>