<div>I think the best way is to conact Digium Hardware support. it seems there may be an IRQ problem.</div> <div> </div> <div>--</div> <div>Deepak<BR><BR><B><I>Francois Deppierraz <francois@ctrlaltdel.ch></I></B> wrote:</div> <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">Hi,<BR><BR>I'm trying to get a TE212 working on a Dell PowerEdge 1850 running<BR>Debian etch using the latest release of libpri (1.4.0), zaptel (1.4.2.1)<BR>and asterisk (1.4.4). The initilization of the Octasic echo canceller<BR>seems to fail when the wct4xxp module is loaded.<BR><BR>[...]<BR>VPM450: echo cancellation for 64 channels<BR>Failed to open chip, code 00103017!<BR>VPM450: Failed to initialize<BR>[...]<BR><BR>By looking in the zaptel code, this error value (0x00103017) means<BR>cOCT6100_ERR_OPEN_EXTERNAL_MEM_BIST_FAILED.<BR><BR>Is anyone familiar with that problem ?<BR><BR>Thanks for your help.<BR><BR><BR><BR><BR>---<BR>TE212P
card: jumpers are set to E1 mode and nothing is connected to that<BR>card at the moment.<BR><BR><BR># uname -a<BR>Linux ditti-voipa-serv-1 2.6.18-4-amd64 #1 SMP Fri May 4 00:37:33 UTC<BR>2007 x86_64 GNU/Linux<BR># cat /etc/zaptel.conf<BR>span=1,1,0,ccs,hdb3,crc4<BR>bchan=1-15<BR>dchan=16<BR>bchan=17-31<BR><BR>span=2,1,0,ccs,hdb3,crc4<BR>bchan=32-46<BR>dchan=47<BR>bchan=48-62<BR># cat /proc/interrupts<BR>CPU0 CPU1<BR>0: 42385 0 IO-APIC-edge timer<BR>6: 3 0 IO-APIC-edge floppy<BR>8: 1 0 IO-APIC-edge rtc<BR>9: 0 0 IO-APIC-level acpi<BR>14: 64 0 IO-APIC-edge ide0<BR>169: 0 0 IO-APIC-level uhci_hcd:usb1<BR>177: 0 0 IO-APIC-level uhci_hcd:usb2<BR>185: 0 0 IO-APIC-level uhci_hcd:usb3<BR>193: 19 0 IO-APIC-level ehci_hcd:usb4<BR>201: 2148 0 IO-APIC-level ioc0<BR>217: 1153 0 IO-APIC-level eth1<BR>225: 160247 0 IO-APIC-level wct2xxp<BR>NMI: 64 42<BR>LOC: 42340 42317<BR>ERR: 0<BR>MIS: 0<BR><BR># dmesg<BR>[...]<BR>Found TE2XXP at base address fe7ffc00, remapped to
ffffc20000004c00<BR>TE2XXP version c01a016a, burst OFF, slip debug: OFF<BR>Octasic optimized!<BR>FALC version: 00000005, Board ID: 00<BR>Reg 0: 0x7daa5400<BR>Reg 1: 0x7daa5000<BR>Reg 2: 0xffffffff<BR>Reg 3: 0x00000000<BR>Reg 4: 0x00000101<BR>Reg 5: 0x00000000<BR>Reg 6: 0xc01a016a<BR>Reg 7: 0x00001300<BR>Reg 8: 0x00000000<BR>Reg 9: 0x00ff0001<BR>Reg 10: 0x0000004a<BR>TE2XXP: Launching card: 0<BR>TE2XXP: Setting up global serial parameters<BR>Found a Wildcard: Wildcard TE210P (3rd Gen)<BR>About to enter spanconfig!<BR>Done with spanconfig!<BR>About to enter spanconfig!<BR>Done with spanconfig!<BR>About to enter startup!<BR>TE2XXP: Span 1 configured for CCS/HDB3/CRC4<BR>wct2xxp: Setting yellow alarm on span 1<BR>timing source auto card 0!<BR>VPM400: Not Present<BR>VPM450: echo cancellation for 64 channels<BR>Failed to open chip, code 00103017!<BR>VPM450: Failed to initialize<BR>Completed startup!<BR>About to enter startup!<BR>TE2XXP: Span 2 configured for
CCS/HDB3/CRC4<BR>wct2xxp: Setting yellow alarm on span 2<BR>timing source auto card 0!<BR>SPAN 2: Primary Sync Source<BR>VPM400: Not Present<BR>Failed to get chip capacity, code 0010305e!<BR>Unsupported channel capacity found on VPM module (0).<BR>Completed startup!<BR>[...]<BR># ztcfg -v<BR><BR>Zaptel Version: 1.4.2.1<BR>Echo Canceller: MG2<BR>Configuration<BR>======================<BR><BR>SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)<BR>SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)<BR><BR>62 channels configured.<BR><BR>#<BR>_______________________________________________<BR>--Bandwidth and Colocation provided by Easynews.com --<BR><BR>asterisk-users mailing list<BR>To UNSUBSCRIBE or update options visit:<BR>http://lists.digium.com/mailman/listinfo/asterisk-users<BR></BLOCKQUOTE><BR><p> 
<hr size=1>
New Yahoo! Mail is the ultimate force in competitive emailing. Find out more at the <a href="http://uk.rd.yahoo.com/mail/uk/taglines/default/championships/games/*http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk/">Yahoo! Mail Championships</a>. Plus: play games and win prizes.