I'm trying to configure a TDM808P card on debian. When I modprobe wctdm24xxp i get this error<br>FATAL: Module wctdm24xxp not found.<br>FATAL: Error running install command for wctdm24xxp<br><br>I think i have successfully compiled the zaptel drivers, and the card appears when i do a lspci
<br><br>02:06.0 Ethernet controller: Digium, Inc. Unknown device 0800 (rev 11)<br> Subsystem: Digium, Inc. Unknown device 0800<br> Flags: bus master, medium devsel, latency 64, IRQ 3<br> I/O ports at e800 [size=256]
<br> Memory at fe200000 (32-bit, non-prefetchable) [size=1K]<br> Expansion ROM at 20000000 [disabled] [size=128K]<br> Capabilities: [c0] Power Management version 2<br><br>I've searched for a solution with no success. Another problem is that when i do a ztcfg -vv i get
<br><br>Notice: Configuration file is /etc/zaptel.conf<br>line 0: Unable to open master device '/dev/zap/ctl'<br><br>1 error(s) detected<br><br>I don't know if the errors are connected and would appreciate some help.
<br><br>Thanks in advance <br clear="all"><br>-- <br>Juliano F. Schroeder<br>--------------------------------------------------<br>Solucionathica<br><a href="http://www.solucionathica.com">http://www.solucionathica.com</a>