Hi<br><br>I am trying to set up * box with the ISDN hfc-s cards. One in NT mode and two in TE. I am using the bristuff-0.3.0-PRE-1r.tar.gz
. The installation went well, but soon after the zaphfc was loaded I started to receive these message in kernlog:<br><br>Aug 23 21:00:08 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 1).
<br>Aug 23 21:00:09 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 5, stat = 0xff, card = 2).<br>Aug 23 21:00:35 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
<br>Aug 23 21:00:39 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 1).<br>Aug 23 21:01:01 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 5, stat = 0xff, card = 2).
<br>Aug 23 21:01:09 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 4, stat = 0xff, card = 1).<br>Aug 23 21:01:27 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
<br>Aug 23 21:01:39 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 1).<br>Aug 23 21:01:53 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
<br>Aug 23 21:02:10 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 1).<br>Aug 23 21:02:19 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
<br>Aug 23 21:02:45 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 5, stat = 0xff, card = 2).<br>Aug 23 21:03:04 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 1).
<br>Aug 23 21:03:11 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).<br>Aug 23 21:03:34 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 4, stat = 0xff, card = 1).
<br>Aug 23 21:03:37 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).<br><br>I know that there was a discussion on the list about this issue, but unfortunately it didn't point me anywhere further.
<br><br>>alternatively you can try this solution on debian:
<br>>4)Modules configuration for startup with zaphfc AND wcfxs on debian stable 3.1 sarge kernel >2.4.27-2-386.
Here a configuration to fix this issue at boottime
emacs /etc/modutils/zaptel<br>>match it to:
<br>>post-install zaphfc /sbin/ztcfg<br>>#post-install tor2 /sbin/ztcfg<br>>#post-install wcusb /sbin/ztcfg<br>>#post-install wcfxo /sbin/ztcfg<br>>#post-install ztdynamic /sbin/ztcfg<br>>#post-install ztd-eth /sbin/ztcfg
<br>>#post-install wct1xxp /sbin/ztcfg<br>>#post-install wct4xxp /sbin/ztcfg<br>>#post-install wcte11xp /sbin/ztcfg<br>>alias wctdm wcfxs<br>>#post-install torisa /sbin/ztcfg<br>>#post-install wcfxs /sbin/ztcfg
<br><br>># end of file /etc/modutils/zaptel
<br><br>>Update the /etc/modules.conf file with:<br>>[EMAIL PROTECTED] update-modules
<br>
>[EMAIL PROTECTED] emacs /etc/modules<br>>add a line like the following at end of the file
<br>
>zaphfc<br>>and finaly reboot for testing<br>>[EMAIL PROTECTED] reboot<br><br>I tried to set up this like described above but it didn't help (I am still getting these messages). This messages sometimes cause my ISDN link to hang (I can receive the calls, but I am not able to make any outgoing calls).
<br>I am using Debian Sarge with custom 2.4.30 kernel.<br>Does anyone have got any idea how can I make this to work.<br><br>Please help!!!! I need it very badly.<br><br>Cheers<br><br>Andrew<br><br>
<br> <br>