<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Dear All,
<p>I have bought a digium TE205p in order to move our E1 pri from a siemens
pbx to an asterisk server platform, I have already gathered the data needed
to configure the card but I am troubled by one thing that seems unclear
on all the documents I read.
<p>The E1 is currently inserted in a modem and from the modem goes out
a cable to the siemens pbx so should I take the E1 from that modem or take
the E1 directly from the provider, plus is there any special pin assignment.
<p>Your Help will be very much appreciated.
<pre>--
Thx
MAG</pre>
</html>