i tried using trixbox once but i need to manually edited the .conf for the tdm400p to work the way i wanted to.<br><br><br><div><span class="gmail_quote">On 7/5/06, <b class="gmail_sendername">Rich Adamson</b> <<a href="mailto:radamson@routers.com">
radamson@routers.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Stewart Loving-Gibbard wrote:<br>><br>> I've spent several days now trying to get my TDM400 card to work. I'm
<br>> running TrixBox 1.1 (at least to start). I've tried an old PII 233mhz<br>> with 256 MB, and a modern Dell Dimension 8400 (P4 3.0 ghz, 1 GM RAM). On<br>> both machines I have a series of installation headaches, some of which
<br>> seem to be TrixBox's fault, since they are fairly consistent between<br>> machines.<br>><br>> I can get Asterix & FreePBX working as long as I don't use the TDM400.<br>> It seems to work great with the soft SIP phone. I can dial into it, get
<br>> voicemail, record messages, etc. But I need it to work with the TDM400<br>> card to be useful. I've followed the Nerd Vittles and SureTeq guides<br>> approximately, and think I should have the ability to receive calls and
<br>> dial out over the TDM's FXO port.<br>><br>> When I dial in, and watch from FreePBX's panel, I see that the "Zap 1"<br>> trunk goes red. The SIP soft phone I have the call directed to then gets<br>
> the call. I have the SIP soft phone on auto-answer, so it picks up. Or,<br>> rather, it thinks it picks up, since the calling phone continues to ring<br>> and eventually goes to my POTS voicemail.<br>><br>> A similar thing happens when I dial out. I call my cell phone, Zap 1
<br>> trunk goes red again, and the soft SIP phone says "call established" but<br>> the call never gets made on the phone line. (I can pick up with a<br>> conventional phone and get a dialtone.)<br>>
<br>> It seems to me that * has recognized the TDM correctly, and that I've<br>> picked the right port on my TDM. But, something is clearly wrong, and I<br>> can't find mention of this kind of thing in the FAQs.<br>
<br>You're probably correct assuming the TDM card has been recognized.<br>However, the majority of users on this list are not TrixBox or FreePBX<br>users and it would appear at least part of your problem might be related<br>
to the various scripts and macros embedded in those implementations.<br>Therefor, you might pose your questions to the lists supporting those<br>implementations.<br><br>I (for one) became frustrated with the lack of documentation for FreePBX
<br>and gave messing with it. It was taking longer to figure out what was<br>supposed to be happening then what the benefits of the gui interface was<br>providing.<br><br>_______________________________________________<br>
--Bandwidth and Colocation provided by <a href="http://Easynews.com">Easynews.com</a> --<br><br>asterisk-users mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">
http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br><br clear="all"><br>-- <br>Regards,<br>Mark Quitoriano, CCNA<br><br>Fan the flame...<br><a href="http://www.spreadfirefox.com/?q=user/register&r=19441">
http://www.spreadfirefox.com/?q=user/register&r=19441</a>