I'm having the exact same problem. Please any ideas? My IP phones keep ringing after PSTN hangup or PSTN answer... for about 6 or 7 seconds.<br><br>On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote: <blockquote type="CITE"> <pre><font color="#000000">Does anyone have any ideas as to what can cause this large delay to stop</font><br><font color="#000000">ringing?</font><br><br><font color="#000000">It's quite a show stopper... imagine ringing a business and being</font><br><font color="#000000">answered by 3 different people, one after the other, all talking over</font><br><font color="#000000">the top of each other.</font><br><br><font color="#000000">On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea wrote:</font><br><font color="#000000">> Hi Undrhil,</font><br><font color="#000000">> </font><br><font color="#000000">> A logical idea, but unfortunately adding it didn't change anything.</font><br><font color="#000000">> </font><br><font color="#000000">>
Two important points:</font><br><font color="#000000">> (1) When I test this with just IAX endpoints, no Zap, the call is hungup</font><br><font color="#000000">> immediately, (2) but the console still shows the user being called</font><br><font color="#000000">> twice.</font><br><font color="#000000">> </font><br><font color="#000000">> So as a wild guess, maybe the console logging twice is OK, and it's my</font><br><font color="#000000">> Zap configuration?</font><br><font color="#000000">> </font><br><font color="#000000">> * extensions.conf:</font><br><font color="#000000">> [incoming]</font><br><font color="#000000">> exten => s,1,Dial(IAX2/carey)</font><br><font color="#000000">> exten => s,2,Hangup(IAX2/carey)</font><br><font color="#000000">> </font><br><font color="#000000">> * zapata.conf:</font><br><font color="#000000">> [channels]</font><br><font color="#000000">> usecallerid=no</font><br><font
color="#000000">> signalling=fxs_ks</font><br><font color="#000000">> context=incoming</font><br><font color="#000000">> channel => 4 </font><br><font color="#000000">> </font><br><font color="#000000">> * zaptel.conf</font><br><font color="#000000">> loadzone=au</font><br><font color="#000000">> defaultzone=au</font><br><font color="#000000">> fxsks=4</font><br><font color="#000000">> </font><br><font color="#000000">> * ztcfg -vv</font><br><font color="#000000">> Channel 04: FXS Kewlstart (Default) (Slaves: 04)</font><br><font color="#000000">> 1 channels configured.</font><br><font color="#000000">> </font><br><font color="#000000">> I'm from Australia so I assume the loadzone and defaultzone is OK as per</font><br><font color="#000000">> zaptel.c. Did not post iax.conf due to my SIP phones having the same</font><br><font color="#000000">> behaviour, and IAX-to-IAX not exhibiting the problem.</font><br><font
color="#000000">> </font><br><font color="#000000">> </font><br><font color="#000000">> On Fri, 2006-06-09 at 04:54 +0000, <a href="mailto:undrhil.1528785@bloglines.com">undrhil.1528785@bloglines.com</a> wrote:</font><br><font color="#000000">> > So, your dialplan for that incoming call is just the one line?</font><br><font color="#000000">> > </font><br><font color="#000000">> > exten =></font><br><font color="#000000">> > s,1,Dial(IAX2/carey)</font><br><font color="#000000">> > </font><br><font color="#000000">> > Nothing else? Try adding a Hangup command on the</font><br><font color="#000000">> > next priority and see if that helps any.</font><br><font color="#000000">> > </font><br><font color="#000000">> > exten => s,2,Hangup</font><br><font color="#000000">> > </font><br><font color="#000000">> > If you</font><br><font color="#000000">> > already have a Hangup command in there,
then I apologize for wasting your</font><br><font color="#000000">> > time. :)</font><br><font color="#000000">> > </font><br><font color="#000000">> > Undrhil</font><br><font color="#000000">> > </font><br><font color="#000000">> > --- Asterisk Users Mailing List - Non-Commercial Discussion</font><br><font color="#000000">> > <<a href="mailto:asterisk-users@lists.digium.com">asterisk-users@lists.digium.com</a> wrote:</font><br><font color="#000000">> > I have a TDM-400P with one FXO module.</font><br><font color="#000000">> > On an incoming call, I have set</font><br><font color="#000000">> > > Asterisk to dial my phone (exten => s,1,Dial(IAX2/carey)),</font><br><font color="#000000">> > which is</font><br><font color="#000000">> > > basically the only thing in my dialplan.</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > When the
call</font><br><font color="#000000">> > is answered by the PSTN phone first, or when the ringing</font><br><font color="#000000">> > > call is hung up,</font><br><font color="#000000">> > Asterisk keeps ringing for 5+ seconds, which causes</font><br><font color="#000000">> > > trouble (the answering</font><br><font color="#000000">> > of already answered calls).</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > I noticed in the Asterisk console that</font><br><font color="#000000">> > my phone is called twice every</font><br><font color="#000000">> > > time there is an incoming call. Is this</font><br><font color="#000000">> > normal, and could it be causing</font><br><font color="#000000">> > > this behaviour?</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > If not, any ideas</font><br><font color="#000000">> >
as to what could be causing this? I can provide full</font><br><font color="#000000">> > > debug logs and my</font><br><font color="#000000">> > relevant configuration if needed.</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > Console log:</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > -- Starting</font><br><font color="#000000">> > simple switch on 'Zap/4-1'</font><br><font color="#000000">> > > -- Executing Dial("Zap/4-1", "IAX2/carey")</font><br><font color="#000000">> > in new stack</font><br><font color="#000000">> > > -- Called carey</font><br><font color="#000000">> > > -- Starting simple switch on 'Zap/4-1'</font><br><font color="#000000">> > </font><br><font color="#000000">> > > -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack</font><br><font color="#000000">> > >
-- Called</font><br><font color="#000000">> > carey</font><br><font color="#000000">> > > -- Call accepted by 10.0.12.102 (format ulaw)</font><br><font color="#000000">> > > -- Format</font><br><font color="#000000">> > for call is ulaw</font><br><font color="#000000">> > > -- Call accepted by 10.0.12.102 (format ulaw)</font><br><font color="#000000">> > > </font><br><font color="#000000">> > -- Format for call is ulaw</font><br><font color="#000000">> > > -- IAX2/carey-1 is ringing</font><br><font color="#000000">> > > --</font><br><font color="#000000">> > IAX2/carey-1 is ringing</font><br><font color="#000000">> > > -- Hungup 'IAX2/carey-1'</font><br><font color="#000000">> > > == Spawn extension</font><br><font color="#000000">> > (incoming, s, 1) exited non-zero on 'Zap/4-1'</font><br><font color="#000000">> > > -- Hungup
'Zap/4-1'</font><br><font color="#000000">> > > -- Hungup 'IAX2/carey-1'</font><br><font color="#000000">> > > == Spawn extension (incoming, s, 1) exited</font><br><font color="#000000">> > non-zero on 'Zap/4-1'</font><br><font color="#000000">> > > -- Hungup 'Zap/4-1'</font><br><font color="#000000">> > > </font><br><font color="#000000">> > </font>On Sun, 2006-06-11 at 15:18 +1000, Carey O'Shea wrote:<br></pre><blockquote type="CITE"> <pre><font color="#000000">Does anyone have any ideas as to what can cause this large delay to stop</font><br><font color="#000000">ringing?</font><br><br><font color="#000000">It's quite a show stopper... imagine ringing a business and being</font><br><font color="#000000">answered by 3 different people, one after the other, all talking over</font><br><font color="#000000">the top of each other.</font><br><br><font color="#000000">On Fri, 2006-06-09 at 15:12 +1000, Carey O'Shea
wrote:</font><br><font color="#000000">> Hi Undrhil,</font><br><font color="#000000">> </font><br><font color="#000000">> A logical idea, but unfortunately adding it didn't change anything.</font><br><font color="#000000">> </font><br><font color="#000000">> Two important points:</font><br><font color="#000000">> (1) When I test this with just IAX endpoints, no Zap, the call is hungup</font><br><font color="#000000">> immediately, (2) but the console still shows the user being called</font><br><font color="#000000">> twice.</font><br><font color="#000000">> </font><br><font color="#000000">> So as a wild guess, maybe the console logging twice is OK, and it's my</font><br><font color="#000000">> Zap configuration?</font><br><font color="#000000">> </font><br><font color="#000000">> * extensions.conf:</font><br><font color="#000000">> [incoming]</font><br><font color="#000000">> exten => s,1,Dial(IAX2/carey)</font><br><font
color="#000000">> exten => s,2,Hangup(IAX2/carey)</font><br><font color="#000000">> </font><br><font color="#000000">> * zapata.conf:</font><br><font color="#000000">> [channels]</font><br><font color="#000000">> usecallerid=no</font><br><font color="#000000">> signalling=fxs_ks</font><br><font color="#000000">> context=incoming</font><br><font color="#000000">> channel => 4 </font><br><font color="#000000">> </font><br><font color="#000000">> * zaptel.conf</font><br><font color="#000000">> loadzone=au</font><br><font color="#000000">> defaultzone=au</font><br><font color="#000000">> fxsks=4</font><br><font color="#000000">> </font><br><font color="#000000">> * ztcfg -vv</font><br><font color="#000000">> Channel 04: FXS Kewlstart (Default) (Slaves: 04)</font><br><font color="#000000">> 1 channels configured.</font><br><font color="#000000">> </font><br><font color="#000000">> I'm from Australia so I assume the
loadzone and defaultzone is OK as per</font><br><font color="#000000">> zaptel.c. Did not post iax.conf due to my SIP phones having the same</font><br><font color="#000000">> behaviour, and IAX-to-IAX not exhibiting the problem.</font><br><font color="#000000">> </font><br><font color="#000000">> </font><br><font color="#000000">> On Fri, 2006-06-09 at 04:54 +0000, <a href="mailto:undrhil.1528785@bloglines.com">undrhil.1528785@bloglines.com</a> wrote:</font><br><font color="#000000">> > So, your dialplan for that incoming call is just the one line?</font><br><font color="#000000">> > </font><br><font color="#000000">> > exten =></font><br><font color="#000000">> > s,1,Dial(IAX2/carey)</font><br><font color="#000000">> > </font><br><font color="#000000">> > Nothing else? Try adding a Hangup command on the</font><br><font color="#000000">> > next priority and see if that helps any.</font><br><font
color="#000000">> > </font><br><font color="#000000">> > exten => s,2,Hangup</font><br><font color="#000000">> > </font><br><font color="#000000">> > If you</font><br><font color="#000000">> > already have a Hangup command in there, then I apologize for wasting your</font><br><font color="#000000">> > time. :)</font><br><font color="#000000">> > </font><br><font color="#000000">> > Undrhil</font><br><font color="#000000">> > </font><br><font color="#000000">> > --- Asterisk Users Mailing List - Non-Commercial Discussion</font><br><font color="#000000">> > <<a href="mailto:asterisk-users@lists.digium.com">asterisk-users@lists.digium.com</a> wrote:</font><br><font color="#000000">> > I have a TDM-400P with one FXO module.</font><br><font color="#000000">> > On an incoming call, I have set</font><br><font color="#000000">> > > Asterisk to dial my phone (exten =>
s,1,Dial(IAX2/carey)),</font><br><font color="#000000">> > which is</font><br><font color="#000000">> > > basically the only thing in my dialplan.</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > When the call</font><br><font color="#000000">> > is answered by the PSTN phone first, or when the ringing</font><br><font color="#000000">> > > call is hung up,</font><br><font color="#000000">> > Asterisk keeps ringing for 5+ seconds, which causes</font><br><font color="#000000">> > > trouble (the answering</font><br><font color="#000000">> > of already answered calls).</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > I noticed in the Asterisk console that</font><br><font color="#000000">> > my phone is called twice every</font><br><font color="#000000">> > > time there is an incoming call. Is this</font><br><font
color="#000000">> > normal, and could it be causing</font><br><font color="#000000">> > > this behaviour?</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > If not, any ideas</font><br><font color="#000000">> > as to what could be causing this? I can provide full</font><br><font color="#000000">> > > debug logs and my</font><br><font color="#000000">> > relevant configuration if needed.</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > Console log:</font><br><font color="#000000">> > > </font><br><font color="#000000">> > > -- Starting</font><br><font color="#000000">> > simple switch on 'Zap/4-1'</font><br><font color="#000000">> > > -- Executing Dial("Zap/4-1", "IAX2/carey")</font><br><font color="#000000">> > in new stack</font><br><font color="#000000">> > > -- Called
carey</font><br><font color="#000000">> > > -- Starting simple switch on 'Zap/4-1'</font><br><font color="#000000">> > </font><br><font color="#000000">> > > -- Executing Dial("Zap/4-1", "IAX2/carey") in new stack</font><br><font color="#000000">> > > -- Called</font><br><font color="#000000">> > carey</font><br><font color="#000000">> > > -- Call accepted by 10.0.12.102 (format ulaw)</font><br><font color="#000000">> > > -- Format</font><br><font color="#000000">> > for call is ulaw</font><br><font color="#000000">> > > -- Call accepted by 10.0.12.102 (format ulaw)</font><br><font color="#000000">> > > </font><br><font color="#000000">> > -- Format for call is ulaw</font><br><font color="#000000">> > > -- IAX2/carey-1 is ringing</font><br><font color="#000000">> > > --</font><br><font color="#000000">> > IAX2/carey-1 is
ringing</font><br><font color="#000000">> > > -- Hungup 'IAX2/carey-1'</font><br><font color="#000000">> > > == Spawn extension</font><br><font color="#000000">> > (incoming, s, 1) exited non-zero on 'Zap/4-1'</font><br><font color="#000000">> > > -- Hungup 'Zap/4-1'</font><br><font color="#000000">> > > -- Hungup 'IAX2/carey-1'</font><br><font color="#000000">> > > == Spawn extension (incoming, s, 1) exited</font><br><font color="#000000">> > non-zero on 'Zap/4-1'</font><br><font color="#000000">> > > -- Hungup 'Zap/4-1'</font><br><br></pre></blockquote><pre><font color="#000000"><a href="http://lists.digium.com/mailman/listinfo/asterisk-users"></a></font> </pre> </blockquote> <p> __________________________________________________<br>Do You Yahoo!?<br>Tired of spam? Yahoo! Mail has the best spam protection around <br>http://mail.yahoo.com