<div>Hi;I've a question:</div>
<div>I use asterisk -R so I can see what's appening in my asterisk and the session of the calls:</div>
<div>I use the vrrp protocol, I use 2 asterisk box;when the master falls down, the slave goes up, and I use X-lite,Phoner,3CXphone;some of this softphones are immediately registered to the slave, but sometimes this don't happen;I must close the softphone from my xp and restart them,and then in the CLI interface I can see that the softphone are restistered in this way:
</div>
<div> </div>
<div> Verbosity is at least 3<br> -- Registered SIP '651' at <a href="http://192.168.251.10">192.168.251.10</a> port 5060 expires 900<br> -- Registered SIP '650' at <a href="http://192.168.251.10">192.168.251.10</a>
port 5061 expires 1800<br> -- Registered SIP '655' at <a href="http://192.168.251.10">192.168.251.10</a> port 3571 expires 900</div>
<div>and then they are ok and I can call.</div>
<div> </div>
<div>If I use the "restart now" command or "reload" in the CLI of the slave, asterisk don't see that the softphones are up, I must close the softphones and restart them.</div>
<div>How can I reload the softphones, without restart them?</div>
<div>THANKS,</div>
<div>Emanuele</div>