2006/5/21, Greg Oliver <<a href="mailto:goliver@cistera.com">goliver@cistera.com</a>>:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>You have to upgrade to a new version of SCCP or older version of SIP<br>before the bootloader on the phone will be able to handle the newer<br>firmware. In the same Cisco page you read the info is there - you can<br>
either use an older version of SIP first, or a newer version of SCCP..<br>Older SIP is probably easier - 6.3 is the newest you can use to then<br>jump to 7.x and/or 8.x..<br><br>You will need to put this in SEPDefault.cnf
(not SIPDefault)<br><br>image_version:P0S3-07-5-00 (whatever version you grab)<br><br>That will tell it to grab the SIP firmware if it is not using OS79XX.txt<br>- I cant remember that far back if it is still used.. Doesn't hurt to
<br>have both though...<br><br>-Greg</blockquote><div><br>I<span class="content">n TFTP root directory, </span>I didn't copy <span class="content">P0S30100.bin file as it is wasn't clear for me from </span>that Cisco page, that I could or not use P0S3-07-5-00 file instead.
<br><br>From what Greg mentioned, I understand that this file is needed to allow upgrade from SCCP 3.0 to SIP 1.0, and hopefully from SIP 1.0 to SIP 7.5.<br><br>I will also rename configuration file from SIPxxx to SEPxxx.
<br><br>I will provide feedback to the list. <br>Thanks for all, anyway.<br></div></div>