I am sorry cause i post this questions is not related to your problem, <br>but i am having problem detecting my TDM400P which is a TDM400P problem. <br><br>I manage to installed the card with compiling with zaptel and it got 2FXS and 2FXO.
<br><br>I am having problem while reboot or restart the system. <br>Kudzu seem to detect TDM400P network card which is Tiger Jet Network Modem /ISDN hardware removed. <br>Is quiet confusing cause if i remove the hardware configuration is still working and something the card no circuits flow.
<br><br>I am using centos 4.2, asterisk , zaptel, libpri 1.2.2 and runnning freepbx as interface to asterisk. <br><br>When i run ztcfg -v , output as below :<br><br>Zaptel Configuration<br>======================<br><br><br>
Channel map:<br><br>Channel 01: FXO Kewlstart (Default) (Slaves: 01)<br>Channel 02: FXO Kewlstart (Default) (Slaves: 02)<br>Channel 03: FXS Kewlstart (Default) (Slaves: 03)<br>Channel 04: FXS Kewlstart (Default) (Slaves: 04)
<br><br>4 channels configured.<br><br><br>Thanks in advance. <br><br><div><span class="gmail_quote">On 5/9/06, <b class="gmail_sendername">Rich Adamson</b> <<a href="mailto:radamson@routers.com">radamson@routers.com</a>
> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Bogdan Tocu wrote:<br>> The outline is like this :<br>> Board 1 channels 1-4 # channels 1-4
<br>> Port 1 unused<br>> Port 2 unused<br>> Port 3 - FXO module - not working<br>> Port 4 - FXO module - working ok<br>> Board 2 - 4 FXO modules - all working ok # channels 5-8<br>> Board 3 - 4 FXO modules - none works .... #channels 9-12
<br>><br>> Any ideeas?<br><br>Which part of the previous post did you not understand?<br><br>You wrote the entries in /etc/zaptel.conf "assuming" that what you are<br>calling Board 1 really is Board 1, and its not. Its Board 3 using your
<br>numbering scheme.<br><br>I don't know of any way to determine exactly how three identical boards<br>are numbered, so you'll have to experiment to determine which board<br>holds channels 1-4, which has channels 5-8, and which has channels 9-12.
<br><br>Its obvious from the error message that you posted that channel 9 and 10<br>correspond to what you are calling Board 1 (since there are no modules<br>in the first two positions of that board).<br><br>So, change your /etc/zaptel.conf and
zapata.conf to address the empty<br>channel 9 and 10 slots.<br><br>Once you get asterisk to run, then (and only then) you can place a call<br>to each pstn line and see which Zap channel corresponds to which board<br>by watching the CLI.
<br><br><br>_______________________________________________<br>--Bandwidth and Colocation provided by <a href="http://Easynews.com">Easynews.com</a> --<br><br>Asterisk-Users mailing list<br>To UNSUBSCRIBE or update options visit:
<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br>