I seem to be getting a connection from telasip but instead of dialing my default extension, nothing happens. I listen to dead air.<br><br>I have a fxo card configured and working on both inbound and outbound calls. Telasip is working outbound. I put in the recommended (by telasip) changes to the trunk for incoming,
e.g. <br>host=<a href="http://gw4.telasip.com">gw4.telasip.com</a><br>insecure=very<br>qualify=yes<br>type=user<br>context=from-pstn<br><br>Then I went to incoming routes and set it up for any did, any cid, but the telasip connection is taking a different route. Here are the log entries for both.
<br><br>Telasip:<br><br>May 2 11:11:55 DEBUG[2670] chan_sip.c: Checking SIP call limits for device jlynch<br>May 2 11:11:55 DEBUG[2670] chan_sip.c: build_route: Contact hop: <<a href="mailto:sip:7707190068@4.79.19.59">
sip:7707190068@4.79.19.59</a>><br>May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing Set("SIP/jlynch-cf63", "FROM_DID=6782280738") in new stack<br>May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing Answer("SIP/jlynch-cf63", "") in new stack
<br>May 2 11:11:55 VERBOSE[6343] logger.c: -- Executing PlayTones("SIP/jlynch-cf63", "ring") in new stack<br>May 2 11:11:55 DEBUG[6343] channel.c: Scheduling timer at 160 sample intervals<br>May 2 11:11:55 VERBOSE[6343]
logger.c: -- Executing NVFaxDetect("SIP/jlynch-cf63", "0") in new stack<br>May 2 11:11:55 DEBUG[6343] app_nv_faxdetect.c: Preparing detect of fax (waitdur=4ms, sildur=1000ms, mindur=100ms, maxdur=-1ms)
<br>May 2 11:11:55 DEBUG[2670] chan_sip.c: Stopping retransmission on '<a href="mailto:21710733271a1e37775bc8ad1259e42f@4.79.19.59">21710733271a1e37775bc8ad1259e42f@4.79.19.59</a>' of Response 102: Match Found<br>May 2 11:11:55 DEBUG[2670] chan_sip.c: Stopping retransmission on '
<a href="mailto:21710733271a1e37775bc8ad1259e42f@4.79.19.59">21710733271a1e37775bc8ad1259e42f@4.79.19.59</a>' of Response 103: Match Found<br>May 2 11:11:55 DEBUG[6343] channel.c: Scheduling timer at 0 sample intervals<br>
May 2 11:11:55 DEBUG[6343] app_nv_faxdetect.c: Got hangup<br><br>Zap:<br>May 2 10:55:09 DEBUG[2670] chan_sip.c: build_route: Contact hop: <<a href="mailto:sip:200@192.168.2.99">sip:200@192.168.2.99</a>><br>May 2 10:55:09 VERBOSE[6287]
logger.c: -- SIP/200-9b14 answered Zap/1-1<br>May 2 10:55:09 DEBUG[6287] chan_zap.c: Requested indication -1 on channel Zap/1-1<br>May 2 10:55:09 DEBUG[6287] channel.c: Scheduling timer at 0 sample intervals<br>May 2 10:55:15 DEBUG[6287]
channel.c: Didn't get a frame from channel: SIP/200-9b14<br>May 2 10:55:15 DEBUG[6287] channel.c: Bridge stops bridging channels Zap/1-1 and SIP/200-9b14<br>May 2 10:55:15 DEBUG[6287] chan_sip.c: update_call_counter(200) - decrement call limit counter
<br>May 2 10:55:15 DEBUG[6287] app_dial.c: Exiting with DIALSTATUS=ANSWER.<br>May 2 10:55:15 VERBOSE[6287] logger.c: == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1' in macro 'dial'<br>May 2 10:55:15 VERBOSE[6287]
logger.c: == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1' in macro 'exten-vm'<br>May 2 10:55:15 VERBOSE[6287] logger.c: == Spawn extension (macro-dial, s, 10) exited non-zero on 'Zap/1-1'<br><br>I even attempted to add an incoming route using the Telasip did, but it didn't work either. I have the radio button clicked in each of them to route the call to extension 200.
<br>