<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2802" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2>Yes,</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2>Same configuration as Martin.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2>1.for incoming call just set the 3804 "hotline" to one sip
extension number.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2>2.for outgoing call, you just using regular dail command to
pass the phone number to 3804 (3804 is a 4FXO port device, the call from
ip side always pass to FXO Port). You can telnet to the 3804 and enable the
one-stage calling function.</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=734101003-31032006></SPAN><SPAN
class=734101003-31032006></SPAN><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2></FONT></SPAN> </DIV>
<DIV dir=ltr align=left><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2>Regards,</FONT></SPAN></DIV>
<DIV dir=ltr align=left><SPAN class=734101003-31032006><FONT face=Arial
color=#0000ff size=2>Kevin</FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] <B>On Behalf Of </B>Martin
Joseph<BR><B>Sent:</B> Sunday, March 26, 2006 12:13 PM<BR><B>To:</B> Asterisk
Users Mailing List - Non-Commercial Discussion<BR><B>Subject:</B> Re:
[Asterisk-Users] welltech Wellgate 3804 in SIP mode<BR></FONT><BR></DIV>
<DIV></DIV><BR>On Mar 25, 2006, at 6:26 PM, Erick Perez wrote:<BR><BR>
<BLOCKQUOTE>Martin, i guess im in dumb mode today because i don't get
what you say, may also be because this will be my first welltech to
configure.<BR>what im trying to do is:<BR></BLOCKQUOTE>Sorry, I don't know if
the 3804 actually uses a similar config setup to my 3701a, so it might not be
you at all.<BR>
<BLOCKQUOTE><BR>remote_voip_gateway-------->asterisk----------->fox/fxs/and_international_voip_providers<BR>call
will always go -----> this way, no incoming calls from the right of the
diagram side to asterisk.<BR></BLOCKQUOTE><BR>Ok, then if it is similar to mine,
all you need to do is set the SIP configuration screen for the wellgate. Look
under "SIP Config" and "security config". Then to dial, you just use (repeated
from below):<BR><BR>For outbound ones, I think I just have a regular
old<BR>Dial(SIP/${EXTEN}@2003} in my dialplan where 2003 is the FXO
port.<BR><BR>Good Luck,<BR>Marty<BR><BR>PS I had to reflash my device with the
SIP formware, as it arrived with H323 firmware.<BR><BR><BR>
<BLOCKQUOTE><BR><BR><BR>On 3/23/06, <B>Martin Joseph</B> <<?color><?param 0000,0000,EEEE> ast@stillnewt.org<?/color>> wrote:<BR>
<BLOCKQUOTE>On Mar 22, 2006, at 10:24 PM, Erick Perez wrote:<BR><BR>> Hi,
does anybody have a working config or tips to connect the welltech<BR>>
wellgate 3804 (4fxo) unit to asterisk via SIP ?<BR>> I think I register
it via SIP with my * box, but when sending calls<BR>> from * to the
wellgate the unit does not pass the call to any of the <BR>> fxo
ports.<BR>><BR><BR>I am using the 3701a, which is a 1 FXO 1 FXS
deal.<BR><BR>The trick for me was the "routing table" or
something like that from<BR>the Web based configuration
screen. There I changed the default for <BR>the FXO to point to
IP, and the IP to default to the FXO.<BR><BR>Then I also have the "line
configuration" set so the extension I want<BR>to ring ie 2020 is the
"hotline" for the FXO.<BR><BR>For outbound ones, I think I just have a
regular old <BR>Dial(SIP/${EXTEN}@2003} in my dialplan where 2003 is the FXO
port.<BR><BR>HTH?<BR>Marty<BR><BR>_______________________________________________<BR>--Bandwidth
and Colocation provided by <?color><?param 0000,0000,EEEE>Easynews.com <?/color>--<BR><BR>Asterisk-Users mailing list<BR>To UNSUBSCRIBE or update
options visit:<BR>
<?color><?param 0000,0000,EEEE>http://lists.digium.com/mailman/listinfo/asterisk-users<?/color><BR></BLOCKQUOTE><BR><BR><BR>--
<BR><BR>-------------------------------------------<BR>Erick Perez<BR>Linux
User
376588<BR><?color><?param 0000,0000,EEEE>http://counter.li.org/<?/color> (Get
counted!!!)<BR>Panama, Republic of Panama
<BR>_______________________________________________<BR>--Bandwidth and
Colocation provided by Easynews.com --<BR><BR>Asterisk-Users mailing
list<BR>To UNSUBSCRIBE or update options
visit:<BR>http://lists.digium.com/mailman/listinfo/asterisk-users<BR></BLOCKQUOTE></BODY></HTML>