<div>Hello,</div> <div> </div> <div>I am trying to connect a TE210P to a SX-2000 but zttool shows RED ALARM.</div> <div>The SX-2000 provides the internal T1 to the * server.</div> <div> </div> <div>Telco -----> SX-2000----> TE210P</div> <div> </div> <div>My config file is below which I got from</div> <div><A href="http://www.voip-info.org/wiki/view/NFAS">http://www.voip-info.org/wiki/view/NFAS</A></div> <div> </div> <div> </div> <div>/etc/zaptel.conf <BR>span=1,1,0,esf,b8zs <BR>span=2,2,0,esf,b8zs <BR>bchan=1-23,25-48 <BR>dchan=24 <BR>loadzone = us <BR>defaultzone = us <BR><BR>/etc/asterisk/zapata.conf </div> <div>[trunkgroups]<BR>trunkgroup=>1,24 <BR>spanmap => 1,1,0 <BR>spanmap => 2,1,2 </div> <div><BR>[channels]<BR>language=en <BR>context=incoming <BR>group=1 <BR>signalling=pri_cpe <BR>switchtype=dms100<BR>callerid=asreceived <BR>rxwink=300 <BR>usecallerid=yes <BR>hidecallerid=no <BR>callwaiting=yes <BR>usecallingpres=yes
<BR>callwaitingcallerid=yes <BR>threewaycalling=yes <BR>transfer=yes <BR>cancallforward=yes <BR>callreturn=yes <BR>echocancel=yes <BR>echocancelwhenbridged=yes <BR>echotraining=400 <BR>rxgain=0.0 <BR>txgain=0.0 <BR>callgroup=1 <BR>pickupgroup=1 <BR>immediate=no <BR>channel => 1-23,25-48 </div> <div> </div> <div>ztcfg -vv looks fine. Could not see errors in the /var/log/messages and /etc/asterisk/messages</div> <div> </div> <div>The LEDs on the TE210P just blinks (red/orange).</div> <div> </div> <div>I read somewhere that RED ALARM means that there is no connection available (i.e. bad cable, etc.)</div> <div> </div> <div>My question is: Do I need a T1 crossover cable for my setup?</div> <div> </div> <div>Any tips on debugging this problem? Any suggestion on how to test if the SX-2000 is configured properly and that the problem is on the TE210P configuration?</div> <div> </div> <div>Thank you in advance.</div> <div> </div>
<div>richard</div>