Hello<br>
<br>
I have a Vood vrg 121 (mgcp adapter) that I'm trying to register to my Asterisk but it doesnt work at all.<br>
I have no earlier experience using mgcp devices I have just been using sip phones so dont be to hard ;-)<br>
<br>
1) Do I have to do anything special to activate mgcp functionality in * or is that made by default?<br>
When register sip phones you write "user id" for current sipuser like [121212] in sip.conf<br>
In mgcp.conf I have just seen Ip-adresses in those brackets like
[<a href="http://192.120.0.1">192.120.0.1</a>] , is there a difference between sip and mgcp when
registrating them<br>
<br>
3) Below is my info that I have put in mgcp.conf, below are some rows
that I dont know what they do (what to put there) and I should be
really glad if anyone could tell me what they means.<br>
I have set ???-"number" before that row I have question about<br>
<br>
???-1 [121212] <br>
context=wtlab<br>
???-2 host=<a href="http://172.30.1.126">172.30.1.126</a> <br>
callerid = "John Doe" <123><br>
callgroup=0<br>
pickupgroup=0<br>
nat=no<br>
threewaycalling=yes<br>
transfer=yes ; transfer requires
threewaycalling=yes. Use FLASH to transfer;callwaiting=yes ; this
might be a cause of trouble for ip10s<br>
cancallforward=yes<br>
???-3 line =>aaln/1 <br>
<br>
???-1 Can I use current users id or do I have to have an ip-adress here?<br>
???-2 Host, ip of current mgcp adapter/phone or? If yes I guess this
means that I have to change this if device is moved to another place (?)<br>
???-3 What is aaln/1 ?<br>
<br>
Thanks in advance!<br>
<br>
Regards /D_S<br>
<br>
<br>
<br>