<DIV>Dear List Members,</DIV> <DIV> </DIV> <DIV>I am trying to setup a small asterisk box. My configure is pretty basic for now. my <SPAN class=docEmphasis>zaptel.conf</SPAN> is as follows </DIV> <DIV> </DIV> <DIV> fxoks=1<BR><STRONG><EM> </EM></STRONG>fxsks=2<BR> loadzone=us<BR> defaultzone=us</DIV> <DIV> </DIV> <DIV>when I run <STRONG># /sbin/ztcfg -vv </STRONG>I get<BR></DIV> <DIV>Zaptel Configuration<BR> ======================<BR><BR><BR> Channel map:<BR><BR> Channel 01: FXO Kewlstart (Default) (Slaves: 01)<BR> Channel 02: FXS Kewlstart (Default) (Slaves: 02)<BR><BR> 2 channels configured.</DIV> <DIV> </DIV> <DIV>my <SPAN class=docEmphasis>zapata.conf is as follows</SPAN></DIV> <DIV><SPAN class=docEmphasis></SPAN> </DIV> <DIV><SPAN class=docEmphasis></SPAN><SPAN
class=docEmphasis>[trunkgroups]<BR>; define any trunk groups<BR><BR>[channels]<BR>; hardware channels<BR>; default<BR>usecallerid=yes<BR>hidecallerid=no<BR>callwaiting=no<BR>threewaycalling=yes<BR>transfer=yes<BR>echocancel=yes<BR>echotraining=yes<BR>immediate=no<BR><BR>; define channels<BR><SPAN class=docEmphStrong>context=internal ; Uses the [internal] context in extensions.conf<BR>signalling=fxo_ks ; Use FXO signalling for an FXS channel<A name=IDX-CHP-4-0902></A> <BR>channel => 1 ; Telephone attached to port 1</SPAN><BR><BR>context=incoming ; Incoming calls go to [incoming] in extensions.conf<BR>signalling=fxs_ks ; Use FXS signalling for an FXO channel<BR>channel => 2 ; PSTN attached
to port 2</SPAN></DIV> <div><SPAN class=docEmphasis></SPAN> </div> <DIV>I have also configured two soft phones (xten). I can dial from one softphone to the other and vice versa. I am using SIP. I am using O'Reilly Asterisk: The Future of Telephony. Now to the questions I hope I have provided enough information I am using the latest release of Redhat Linux and Asterisk. I have got 1 FXS and 3 FXO channels.</DIV> <DIV> </DIV> <DIV>1. I do not get any kind of tone in my analogie phone connected to the FXS port.</DIV> <DIV>2. when I run ZTTOOL I see the card but are there any other tools that give more information I do not see any activity going on.</DIV> <DIV>3. when I turn on computer all the lights at the back of digium card are green and are list even though no wire is inserted. Is that normal?</DIV> <DIV>4. when I insert analogue phone line from telco in FXO port what am I suppose to look at in the zttool. I do not see any kind of activity so far.</DIV>
<DIV>5. Are there any open source graphical tools that I can also instal to configure, monitor and troubleshoot asterisk.</DIV> <DIV>6. What other books/links can be helpful in learning this interesting software.</DIV> <DIV> </DIV> <DIV>I thank you all for you help in advance.</DIV> <DIV> </DIV> <DIV>Regards,</DIV> <DIV>Amir Aziz<BR></DIV> <DIV> </DIV><p>__________________________________________________<br>Do You Yahoo!?<br>Tired of spam? Yahoo! Mail has the best spam protection around <br>http://mail.yahoo.com