<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7638.1">
<TITLE>Asterisk 1.0/1.2 on cobalt Raq2-4</TITLE>
</HEAD>
<BODY>
<DIV id=idOWAReplyText17265 dir=ltr>
<DIV dir=ltr><FONT size=2>Anyone ever tried to install on a Cobalt Raq device?
This is a 1U 19" rack computer, the Raq2 using a Mips processor, the Raq4 using
a K6-2/3 processor.<BR><BR>As I do have a few of these as spares, I was
wondering if I could use them as my pbx system, because of their low
power-system and dence system box.<BR><BR>I simply need the pbx to serve 2
phones in my appartment, a SIP- connection for 4 external internet devices (my
brother, living in the USA, my parents, living a few miles from here, and my
nefew living in France and his mother, living here in Belgium too)<BR><BR>Has
anyone done this setup on a Raq2? Or do I need to use the extra power of the
Raq4 (faster cpu and mem, bigger faster disk, ...)<BR><BR>Anyone having a
pkg-installer for the raq devices, as they are used for updates
etc...?<BR><BR>Thanks<BR><BR>Bram</FONT> </DIV></DIV>
</BODY>
</HTML>