<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
only new to asterisk, but have had some hardware exp.....<br>
<br>
stay away from irq9 its tied to irq2 and will always be shared,
Paul has the go.. in bios disable serial and or usb (if not using) and
make sure irda is not enabled. another one is the lpt port if your not
using that, there is another irq you can steel..<br>
<br>
dont share interrupts, as a rule(if you can help it)... it usually
leads to system instability and usually under load.<br>
<br>
UBCD ...(<font color="#008000"><a class="moz-txt-link-abbreviated" href="http://www.ultimatebootcd.com">www.ultimatebootcd.com</a>)</font>. has
some nice tools that can probe a system to give a second appinion on
interrupt conflicts, ram and hard drive errors.....<br>
its my best tool for hardware problems..<br>
<br>
<br>
<br>
hope it helps ......<br>
<br>
phil..<br>
<br>
<br>
Mr. James W. Laferriere wrote:<br>
<blockquote
cite="midPine.LNX.4.64.0510262021170.6389@filesrv1.baby-dragons.com"
type="cite">
<pre wrap=""> Hello Paul & all ,
On Wed, 26 Oct 2005, Mr. James W. Laferriere wrote:
</pre>
<blockquote type="cite">
<pre wrap=""> Hello Paul & all , I've tried everything I know to attempt to get the
wcfxo.ko not to use irq 9 . THe 6 line cord does not appear to effect
the signaling to the x100p card , I have turned up the debugging & have
that being syslog'd . Have debugging on zaptel as well . Nothing seems
out of the ordinary . But monitoring from 'asterisk -d -vvvvv -nr'
console does not show anything '.' . Have I forgotten some
configurations or magical incantation ? Tia , JimL
On Wed, 26 Oct 2005, Paul wrote:
</pre>
<blockquote type="cite">
<pre wrap="">First I don't like the 6 line cord. Use an rj11 2 wire cord, but watch the
crossover vrs straight on the old red and green.
Next the interrupt must be fixed. Do this in the CMOS before you boot. Go
to the PCI bus assignments and set the IRQ or go and disable the serial
ports thereby allowing irq 3 and 4 to be assigned.
:)
Paul
</pre>
</blockquote>
</blockquote>
<pre wrap=""><!----> Sorry about the top posting ... Also forgot the syslog output .
Tia , JimL
Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent: <NULL>, set: module
Oct 26 20:11:19 asterisk-test kernel: subsystem zaptel: registering
Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent: <NULL>, set: class
Oct 26 20:11:19 asterisk-test kernel: kobject zaptimer: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zapchannel: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zappseudo: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zapctl: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: Zapata Telephony Interface Registered on major 196
Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent: <NULL>, set: module
Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent: <NULL>, set: drivers
Oct 26 20:11:19 asterisk-test kernel: PCI: Found IRQ 9 for device 0000:01:02.0
Oct 26 20:11:19 asterisk-test kernel: PCI: Sharing IRQ 9 with 0000:00:1f.3
Oct 26 20:11:19 asterisk-test kernel: kobject zap1: registering. parent: zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: New regoffset: 7
Oct 26 20:11:20 asterisk-test kernel: wcfxo: DAA mode is 'FCC'
Oct 26 20:11:20 asterisk-test kernel: Found a Wildcard FXO: Wildcard X101P
Oct 26 20:11:20 asterisk-test kernel: Recalculating slaves on WCFXO/0/0
Oct 26 20:11:20 asterisk-test kernel: Done Recalculating slaves on WCFXO/0/0 (last is WCFXO/0/0)
Oct 26 20:11:20 asterisk-test kernel: Configured channel WCFXO/0/0, flags 0201, sig 2004
Oct 26 20:11:20 asterisk-test kernel: Registered tone zone 0 (United States / North America)
Oct 26 20:11:20 asterisk-test kernel: BATTERY!
Oct 26 20:11:39 asterisk-test kernel: Out of storage space
Oct 26 20:11:48 asterisk-test kernel: RING!
Oct 26 20:11:50 asterisk-test kernel: NO RING!
Oct 26 20:11:54 asterisk-test kernel: RING!
Oct 26 20:11:56 asterisk-test kernel: NO RING!
Oct 26 20:13:50 asterisk-test kernel: RING!
Oct 26 20:13:52 asterisk-test kernel: NO RING!
Oct 26 20:13:56 asterisk-test kernel: RING!
Oct 26 20:13:57 asterisk-test kernel: NO RING!
</pre>
</blockquote>
<br>
</body>
</html>