<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1515" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face="Courier New" size=2>
<DIV>Hello everybody,<BR> <BR>I have been googling for hours and also
searched on <A
href="http://www.voip-info.org/wiki-Asterisk">http://www.voip-info.org/wiki-Asterisk</A>,
but I still can not find any information for the problem I have. So I
hope one of you could help me out.<BR> <BR>I have actually very little
experience in Asterisk and also Linux. But by following installation guide,
luckily I could get asterisk working. That is only with SIP and IAX channels
though, no zaptel installed. As I wanted to explore more, I bought a TDM400P
development kit (TDM11B) from an authorised Asterisk reseller in Germany. After
I updated my Asterisk (make update) and installed zaptel last week (27 Sep
2005), here is what I got:<BR> <BR># lspci -v<BR>01:05.0 Network
controller: Unknown device
e159:0001<BR> Subsystem: Unknown
device b119:0001<BR> Flags: bus
master, medium devsel, latency 100, IRQ
209<BR> I/O ports at 2400
[size=256]<BR> Memory at efffe000
(32-bit, non-prefetchable)
[size=4K]<BR> Capabilities: [40] Power
Management version 2<BR> <BR># dmesg<BR>Module 0: Installed -- AUTO
FXS/DPO<BR>Module 1: Not installed<BR>Module 2: Not installed<BR>Module 3:
Installed -- AUTO FXO (FCC mode)<BR>Found a Wildcard TDM: Wildcard TDM400P REV I
(2 modules)<BR></DIV>
<DIV>Both LEDs of the FXO and FXS modules are illuminated. I guess that is a
normal state.<BR> <BR>Is the status of "Unknown device" a normal
status?<BR> <BR>From what you have experienced, is there any issue with
revision I? I know that there are problems on the cards with revision E or F, so
I don't want to waste my time trying to configure the card, which maybe in the
end I have to return the card to be replaced as well.<BR> <BR>Do you think
this is just an issue of the driver (zaptel) or something else? Do you have any
hints on what should be changed or modified?<BR> <BR>I sent an email to
Digium support and got only a reply like this:<BR> <BR>"Although the card
is being shown as an 'Unknown Device', it should still work
properly."<BR> <BR>To be honest, I am not happy with that
answer.<BR> <BR>FYI, I have installed Asterisk (CVS HEAD - 27 Sep 2005) on
IBM xSeries 330 (8654-51Y) running Fedora Core 4 (kernel 2.6.12-1).</DIV>
<DIV> </DIV>
<DIV>Thanks in advance for your answers.<BR> <BR>Kind
regards,<BR> <BR>Anto<BR>----</DIV>
<DIV> </DIV></FONT></DIV></BODY></HTML>