<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.0.10">
</HEAD>
<BODY>
can you run tftp manually ?<BR>
<BR>
tftp 192.168.2.2<BR>
<BR>
get ata01234567890a<BR>
<BR>
<BR>
*******************<BR>
<BR>
from the RTFM in the upgrade package..<BR>
<BR>
<BR>
<BR>
sata186us version 3.1
<BR>
<BR>
This is a newer manual upgrade server software, also previously known
<BR>
as "upgrade.exe"
<BR>
<BR>
Upgrade for ATA 186/188
<BR>
<BR>
NOTE: This software is to be run from dos command line
<BR>
in Windows 9X/ME/NT/2000
<BR>
<BR>
Requirements:
<BR>
-) network connection between PC and Cisco ATA 186
<BR>
-) PC machine running windows O/S
<BR>
<BR>
----------------------------------------------------
<BR>
To upgrade your box, save this executable and the software image
<BR>
(the software image will have a ".zup" extension) and language
<BR>
image (the language image will have a ".kup" extension) in a
<BR>
directory on your PC. At the DOS prompt of the directory where
<BR>
the files are saved, you will enter the following:
<BR>
<BR>
sata186us <software_file_name> -d1 -any2
<BR>
<BR>
WARNING -- When upgrading from software version 1.xx to 2.0, make
<BR>
sure there are entries in the UID0 and UID1 fields, and that you
<BR>
hear a dial tone when you pick up the telephone handset. Failure
<BR>
to do so can result in loss of the MAC address during upgrade.
<BR>
<BR>
Your screen will prompt you with instructions on how to upgrade
<BR>
the box. You will access the voice prompt of the ATA 186 and
<BR>
enter the following commands:
<BR>
<BR>
100#<ip_address_of_PC>*8000#
<BR>
(to upgrade the ATA 186's software version)
<BR>
<BR>
101#<ip_address_of_PC>*8000#
<BR>
(to upgrade the ATA 186's language file)
<BR>
<BR>
When upgrading many boxes, you can save time by saving the commands
<BR>
above in your telephone's speed-dial, and using them after accessing
<BR>
the ATA 186's voice menu.
<BR>
----------------------------------------------------
<BR>
Available options: when using this upgrade software:
<BR>
<BR>
usage:
<BR>
<BR>
sata186us version 3.1
<BR>
usage: sata186us {-h[host_ip]} {-p[port]} {-quiet} <imageFile>
<BR>
-h[host_ip] Set host IP to specific IP (in the case where there
<BR>
are more than one IP addresses for the host.
<BR>
Default use 1st IP address obtained by gethostbyname).
<BR>
-p[port] Set server port to specific port (default is 8000,
<BR>
use different port only if you are setting up an IP
<BR>
directed upgrade server other than the default).
<BR>
-quiet quiet mode, send all output to log file named
<BR>
as [port].log (useful when running the upgrade
<BR>
server as a deamon).
<BR>
-any Allow upgrade even if software version is less
<BR>
than or equal to those of client box.
<BR>
-any2 Allow upgrade regardless of software type and version.
<BR>
-d1,-d2,-d3 Set verbose level for debugging.
<BR>
imageFile Image file is file with a '.zup' or '.kup' extension.
<BR>
e.g.
<BR>
sata186us -any -d1 test.zup
<BR>
sata186us -h192.168.2.170 -p8002 -quiet test.zup
<BR>
<BR>
----------------------------------------------------
<BR>
Below is a sample run of upgrade server in ready mode
<BR>
PC name: mypc
<BR>
PC IP: 192.168.1.10
<BR>
----------------------------------------------------
<BR>
Microsoft(R) Windows Millennium
<BR>
(C)Copyright Microsoft Corp 1981-1999.
<BR>
<BR>
C:\>ata186us ata134-elang.kup
<BR>
Using Host: mypc with IP : 192.168.1.10 as upgrade server
<BR>
image found: language 51 -- ata186.itsp2.v1.34
<BR>
<BR>
Using dialpad of your telephone (attached to your ATA box),
<BR>
press ATA button to go to main menu, and enter:
<BR>
<BR>
101#192*168*1*10*8000# (to upgrade language 51)
<BR>
<BR>
NOTE:
<BR>
Pressing 123# will announce your code's version number.
<BR>
You can later verify that you have upgraded your ATA box.
<BR>
<BR>
-------------------------------------------
<BR>
<BR>
This program runs continuously; Press <ctrl>-c to abort.
<BR>
Upgrade server ready...
<BR>
<BR>
<BR>
************************************************************<BR>
<BR>
<BR>
from: <A HREF="http://voip-info.org/wiki-Asterisk+phone+cisco+ATA18x">http://voip-info.org/wiki-Asterisk+phone+cisco+ATA18x</A><BR>
<BR>
The latest 2.x release SIP/H.323 firmware: <BR>
<A HREF="ftp://ftp.rekom.ru/pub/ata18x/ata18x-v2-16-2-030909a-1.zip"><U>ftp://ftp.rekom.ru/pub/ata18x/ata18x-v2-16-2-030909a-1.zip</A><BR>
<A HREF="http://kvin.lv/pub/Cisco/ata18x-v2-16-2-030909a-1.zip">http://kvin.lv/pub/Cisco/ata18x-v2-16-2-030909a-1.zip</U></A><BR>
<BR>
3.1(0) firmware: <BR>
<A HREF="http://kvin.lv/pub/Cisco/ata_03_01_00_sip_040211_1.zip"><U>http://kvin.lv/pub/Cisco/ata_03_01_00_sip_040211_1.zip</U></A><BR>
<BR>
<BR>
<BR>
On Sun, 2005-05-01 at 08:49, Hermann Wecke wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE><FONT COLOR="#737373"><I>I'm trying to use TFTP to update the firmware on a Cisco ATA188 but I'm
receiving this error:
May 1 06:51:50 mail2 in.tftpd[11499]: connect from 192.168.2.2
May 1 06:51:50 mail2 tftpd[11500]: tftpd: trying to get file:
ata01234567890a
May 1 06:51:50 mail2 tftpd[11500]: tftpd: serving file from /tftpboot
May 1 06:51:50 mail2 in.tftpd[11501]: connect from 192.168.2.2
May 1 06:51:50 mail2 tftpd[11502]: tftpd: trying to get file:
ata01234567890a
May 1 06:51:50 mail2 tftpd[11502]: tftpd: serving file from /tftpboot
May 1 06:51:50 mail2 in.tftpd[11503]: connect from 192.168.2.2
May 1 06:51:50 mail2 tftpd[11504]: tftpd: trying to get file:
ata01234567890a
May 1 06:51:50 mail2 tftpd[11504]: tftpd: serving file from /tftpboot
May 1 06:51:55 mail2 tftpd[11500]: tftpd: read: Connection refused
May 1 06:51:55 mail2 tftpd[11502]: tftpd: read: Connection refused
May 1 06:51:55 mail2 tftpd[11504]: tftpd: read: Connection refused
hosts.allow and hosts.deny are empty, directory /tftpboot and files are
readable by owner/group/others. Running tftpd (0.17-12) on Debian Sarge.
Similar error message when running atftp.
Ideas?
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com</FONT>
<A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users"><U>http://lists.digium.com/mailman/listinfo/asterisk-users</U></A>
<FONT COLOR="#737373">To UNSUBSCRIBE or update options visit:
</FONT><A HREF="http://lists.digium.com/mailman/listinfo/asterisk-users"><U>http://lists.digium.com/mailman/listinfo/asterisk-users</U></I></A></PRE>
</BLOCKQUOTE>
<PRE><TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
Derek Whitten <<A HREF="mailto:derek@kfuq.net"><U>derek@kfuq.net</U></A>><BR>
kFuQ Productions
</TD>
</TR>
</TABLE>
</PRE>
</BODY>
</HTML>