<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=big5">
<META content="MSHTML 6.00.2900.2627" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>
<DIV><FONT face=Arial>Hi !</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>I am trying to configure a E100P card with Channel bank,
but I am a bit confused with<BR>each 64K channel's ABCD bits.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>The * will be connected to a PSTN switch with E1 Channel
Bank lines. <BR>The E1 lines will be used for incoming calls as FXS
channels.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>My problem now is where to find the CAS signalling ABCD
bit table ? (TxABCD, RxABCD)</FONT></DIV>
<DIV><FONT face=Arial>Could I change the ABCD value?</FONT></DIV>
<DIV><FONT size=2></FONT><BR><FONT face=Arial>Thanks for your help.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>These are my system info:</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>[zaptel.conf]<BR># E100P
card<BR>span=1,0,0,cas,hdb3,crc4<BR>fxoks=1-12<BR>unused=13-15<BR>unused=17-31<BR>#<BR>#
Wildcard X100P card<BR>fxsks=32<BR>defaultzone=us<BR>loadzone=us</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><BR><FONT
face=Arial>[zapata.conf]<BR>[channels]<BR>musiconhold=default<BR>signalling=fxo_ks<BR>echocancel=yes<BR>echocancelwhenbridged=yes<BR>echotraining=400<BR>callerid=asreceived<BR>context=default<BR>channel
=> 1-12 </FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>language=en<BR>signalling=fxs_ks<BR>channel =>
32</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><BR><FONT face=Arial>Output of zttool:<BR>-<BR>
Alarms
Span <BR>
OK
Digium Wildcard E100P E1/PRA Card 0<BR>
OK
Wildcard X101P Board 1 </FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><BR><FONT face=Arial> Current
Alarms: No alarms.
<BR> Sync
Source: Internally clocked
<BR> IRQ
Misses:
0<BR> Bipolar
Viol:
0<BR> Tx/Rx
Levels: 0/
0<BR>
Total/Conf/Act: 31/ 12/ 0
<BR>
1111111111222222222333<BR>
1234567890123456789012345789012<BR>
TxA
000000000000<BR>
TxB
111111111111<BR>
TxC
000000000000<BR>
TxD
111111111111<BR>
<BR> RxA
000000000000<BR>
RxB
000000000000<BR>
RxC 111111111111
<BR> RxD
000000000000 <BR>-</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><BR><FONT face=Arial>[root@GW240 /]#
lsmod<BR>Module
Size Used by Not
tainted<BR>wcfxo
9376 0
(unused)<BR>wct1xxp
13184 0
(unused)<BR>zaptel
179168 0 [wcfxo wct1xxp]</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>[root@GW240 /]# cat
/proc/interrupts<BR>
CPU0<BR> 0:
68392 XT-PIC
timer<BR> 1:
4 XT-PIC
keyboard<BR> 2:
0 XT-PIC
cascade<BR> 3:
453361 XT-PIC
wcfxo<BR> 5:
1048 XT-PIC
eth0<BR> 8:
1 XT-PIC
rtc<BR> 9:
0 XT-PIC usb-ohci,
usb-ohci, ehci-hcd<BR> 10:
415190 XT-PIC
t1xxp<BR> 12:
32 XT-PIC PS/2
Mouse<BR> 14:
5257 XT-PIC
ide0<BR> 15:
0 XT-PIC
ide1<BR>NMI:
0<BR>ERR: 0</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>[root@GW240 /]# cat /proc/zaptel/1<BR>Span 1: WCT1/0
"Digium Wildcard E100P E1/PRA Card 0" HDB3//CRC4</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT
face=Arial> 1
WCT1/0/1 FXOKS<BR> 2
WCT1/0/2
FXOKS<BR>
...<BR> 11 WCT1/0/11
FXOKS<BR> 12 WCT1/0/12
FXOKS</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>--</FONT></DIV>
<DIV><FONT face=Arial>Frank Lin</FONT></DIV>
<DIV><A href=""><FONT face=Arial>yuda@mafia.ee.ccu.edu.tw</FONT></A></DIV>
<DIV><FONT face=Arial></FONT> </DIV></DIV></BODY></HTML>