<br><font size=2 face="sans-serif">Hello all,</font>
<br>
<br><font size=2 face="sans-serif">I have got a new project with asterisk, That it is to replace the</font>
<br><font size=2 face="sans-serif">existing PBX on a company.</font>
<br>
<br><font size=2 face="sans-serif">This company, has one remote officce. From one officce you can dial an</font>
<br><font size=2 face="sans-serif">extension and talk with the other end.</font>
<br>
<br><font size=2 face="sans-serif">There are a tunnel between the offices, using cisco routers for data</font>
<br><font size=2 face="sans-serif">and extensions calls.</font>
<br>
<br><font size=2 face="sans-serif">In the remote office, the router has two ISDN ports. One of them is</font>
<br><font size=2 face="sans-serif">for make calls to the PSTN, and other for make extension calls.</font>
<br>
<br><font size=2 face="sans-serif">I tryed to connect an asterisk CAPI channel against the router ISDN</font>
<br><font size=2 face="sans-serif">port corresponding the one to make extensions calls. But I cannot make</font>
<br><font size=2 face="sans-serif">any calls. I tryed all of the CAPI ports on my asterisk without</font>
<br><font size=2 face="sans-serif">success.</font>
<br>
<br><font size=2 face="sans-serif">I always get this error.</font>
<br>
<br><font size=2 face="sans-serif">Connected to Asterisk 1.0.3 currently running on Asterisk-OKM (pid = 991)</font>
<br>
<br><font size=2 face="sans-serif">Verbosity is atleast 3</font>
<br>
<br><font size=2 face="sans-serif"> -- Remote UNIX connection</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing ChanIsAvail("SIP/112-8c2e",</font>
<br><font size=2 face="sans-serif">"CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new</font>
<br><font size=2 face="sans-serif">stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing SetVar("SIP/112-8c2e", "CANAL=916741111") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing Dial("SIP/112-8c2e", "CAPI/916741111:263|70|Tt") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == CAPI Call CAPI[contr2/916741111]/59 -- Called 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- CONNECT_CONF ID=001 #0x0026 LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Info = 0x0</font>
<br>
<br><font size=2 face="sans-serif"> == received CONNECT_CONF PLCI = 0x102 INFO = 0</font>
<br>
<br><font size=2 face="sans-serif"> -- DISCONNECT_IND ID=001 #0x001b LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Reason = 0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == DISCONNECT_IND PLCI=0x102 REASON=0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == No one is available to answer at this time</font>
<br>
<br><font size=2 face="sans-serif">Apr 18 16:56:59 WARNING[1402]: pbx.c:1934 ast_pbx_run: Timeout, but no</font>
<br><font size=2 face="sans-serif">rule 't' in context 'default'</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing ChanIsAvail("SIP/112-ef31",</font>
<br><font size=2 face="sans-serif">"CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new</font>
<br><font size=2 face="sans-serif">stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing SetVar("SIP/112-ef31", "CANAL=916741111") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing Dial("SIP/112-ef31", "CAPI/916741111:263|70|Tt") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == CAPI Call CAPI[contr2/916741111]/61 -- Called 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- CONNECT_CONF ID=001 #0x0027 LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Info = 0x0</font>
<br>
<br><font size=2 face="sans-serif"> == received CONNECT_CONF PLCI = 0x102 INFO = 0</font>
<br>
<br><font size=2 face="sans-serif"> -- DISCONNECT_IND ID=001 #0x001c LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Reason = 0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == DISCONNECT_IND PLCI=0x102 REASON=0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == No one is available to answer at this time</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing ChanIsAvail("SIP/112-11cd",</font>
<br><font size=2 face="sans-serif">"CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new</font>
<br><font size=2 face="sans-serif">stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing SetVar("SIP/112-11cd", "CANAL=916741111") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing Dial("SIP/112-11cd", "CAPI/916741111:263|70|Tt") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == CAPI Call CAPI[contr2/916741111]/63 -- Called 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- CONNECT_CONF ID=001 #0x0028 LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Info = 0x0</font>
<br>
<br><font size=2 face="sans-serif"> == received CONNECT_CONF PLCI = 0x102 INFO = 0</font>
<br>
<br><font size=2 face="sans-serif"> -- DISCONNECT_IND ID=001 #0x001d LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Reason = 0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == DISCONNECT_IND PLCI=0x102 REASON=0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == No one is available to answer at this time</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing ChanIsAvail("SIP/112-64b2",</font>
<br><font size=2 face="sans-serif">"CAPI/916741111&CAPI/916741111&CAPI/914850127&CAPI/914850127") in new</font>
<br><font size=2 face="sans-serif">stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing SetVar("SIP/112-64b2", "CANAL=916741111") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- Executing Dial("SIP/112-64b2", "CAPI/916741111:263|70|Tt") in new stack</font>
<br>
<br><font size=2 face="sans-serif"> -- data = 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- capi request omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == found capi with omsn = 916741111</font>
<br>
<br><font size=2 face="sans-serif"> == CAPI Call CAPI[contr2/916741111]/65 -- Called 916741111:263</font>
<br>
<br><font size=2 face="sans-serif"> -- CONNECT_CONF ID=001 #0x0029 LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Info = 0x0</font>
<br>
<br><font size=2 face="sans-serif"> == received CONNECT_CONF PLCI = 0x102 INFO = 0</font>
<br>
<br><font size=2 face="sans-serif"> -- DISCONNECT_IND ID=001 #0x001e LEN=0014</font>
<br>
<br><font size=2 face="sans-serif"> Controller/PLCI/NCCI = 0x102</font>
<br>
<br><font size=2 face="sans-serif"> Reason = 0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == DISCONNECT_IND PLCI=0x102 REASON=0x3301</font>
<br>
<br><font size=2 face="sans-serif"> == No one is available to answer at this time</font>
<br>
<br><font size=2 face="sans-serif">Asterisk-OKM*CLI></font>
<br>
<br><font size=2 face="sans-serif">Any clue will be welcomed.</font>
<br>
<br><font size=2 face="sans-serif">Thanks for your time.</font>
<br>
<br><font size=2 face="sans-serif">Ismael.</font>