<DIV>Hi all</DIV>
<DIV> </DIV>
<DIV>I newly added a X101P into my asterisk that already have a TE410P running 2 E1s namely span1 and span2</DIV>
<DIV> </DIV>
<DIV>I am unable to get * to recognized the new X101P after i did modprbe wct4xxp and then modprobe wcfxo. ztcfg -vv reported all 63 channels are configured but zttool tells me that span 1,2,3 are OK and X101P UNCONFIGURED. </DIV>
<DIV> </DIV>
<DIV>I do not have anything plug into span 3 </DIV>
<DIV> </DIV>
<DIV>below are what i have </DIV>
<DIV> </DIV>
<DIV><U>zapata.conf</U></DIV>
<DIV><U></U> </DIV>
<DIV>[channels]<BR>context=default<BR>overlapdial=no<BR>signalling=pri_cpe<BR>switchtype=euroisdn<BR>pridialplan=unknown<BR>rxwink=125<BR>echocancel=no<BR>echocancelwhenbridged=yes<BR>rxgain=0.0<BR>txgain=0.9<BR>immediate=yes<BR>musiconhold=default<BR>group=1<BR>channel => 1-15,17-31<BR>busydetect=no<BR>group=2<BR>channel => 32-46,48-62<BR>busydetect=no</DIV>
<DIV>group=5<BR>signalling=fxs_ks<BR>channel=>63<BR>context=default<BR></DIV>
<DIV><U>zaptel.conf</U></DIV>
<DIV> </DIV>
<DIV>span=1,1,0,ccs,hdb3<BR>bchan=1-15,17-31<BR>dchan=16<BR>alaw=1-31</DIV>
<DIV>span=2,1,0,ccs,hdb3,crc4<BR>bchan=32-46,48-62<BR>dchan=47<BR>alaw=32-62</DIV>
<DIV>fxsks=63<BR>loadzone=us<BR></DIV>
<DIV><U>ztcfg -vv</U></DIV>
<DIV><U></U> </DIV>
<DIV>Channel 62: Individual Clear channel (A-law) (Slaves: 62)<BR>Channel 63: FXS Kewlstart (Default) (Slaves: 63)
<DIV>63 channels configured.</DIV></DIV><p>
<hr size=1>Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/my/navbar/sethp/*http://www.yahoo.com/r/hs">Make Yahoo! your home page</a>