<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML DIR=ltr><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"></HEAD><BODY><DIV><FONT face='Arial' color=#000000 size=2>Anyone have experiece with polycom phones?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am experiencing a really weird problem. In an
office where I have the following extensions:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>100</FONT></DIV>
<DIV><FONT face=Arial size=2>101</FONT></DIV>
<DIV><FONT face=Arial size=2>102</FONT></DIV>
<DIV><FONT face=Arial size=2>103</FONT></DIV>
<DIV><FONT face=Arial size=2>104</FONT></DIV>
<DIV><FONT face=Arial size=2>110</FONT></DIV>
<DIV><FONT face=Arial size=2>111</FONT></DIV>
<DIV><FONT face=Arial size=2>120</FONT></DIV>
<DIV><FONT face=Arial size=2>130</FONT></DIV>
<DIV><FONT face=Arial size=2>140</FONT></DIV>
<DIV><FONT face=Arial size=2>141</FONT></DIV>
<DIV><FONT face=Arial size=2>150</FONT></DIV>
<DIV><FONT face=Arial size=2>200</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>On the Polycom phones, when I want to dial from
extension 100 to any extension 120 or above, or dial out, it dials just fine. If
I want to dial from extension 100 to extension 101,or 102 or 103 or 104, after
you dial 10 then it flashes connecting (really fast flash) but doesn't connect
to anything. Then you can dial the last digit of the extension. Otherwise, if
you dial 101 you are forced to dial the last 1 twice because it wont send
it.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have ruled out asterisk completely. Nothing wrong
in the dialplan. I have also ruled out DTMF. So it can either be buggy firmware
or something I am missing in the XML configs.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any ideas?</FONT></DIV></BODY></HTML>