ok, thanks for pointing that out...<BR><BR>
<BLOCKQUOTE style="PADDING-LEFT: 8px; MARGIN-LEFT: 8px; BORDER-LEFT:
blue 2px solid"><BR>-------- Original Message --------<BR>Subject: RE:
[Asterisk-Users] bridging iaxtel calls to PSTN<BR>From: "Rich Adamson"
<radamson@routers.com><BR>Date: Mon, February 21, 2005 4:00
pm<BR>To: "Asterisk Users Mailing List - Non-Commercial
Discussion"<BR><asterisk-users@lists.digium.com><BR><BR>iaxtel is
not working and hasn't been for some time. All of us that<BR>have 700
numbers get the same response that you are.
<BR><BR>------------------------<BR>> Hello,<BR>> actually
I did, but nobody responded to that. So, here it is one more
time:<BR>> ___________________<BR>> Hello,<BR>> can
someone tell me what's wrong with this? I can't make toll free calls
via iaxtel. Here's <BR>the definition in my extensions.conf<BR>>
<BR>> [iaxtel-trunks]<BR>> ;<BR>> ;outbound 1-700 and
toll free calls go via iaxtel<BR>> ;be sure to include the
iaxtel-trunks context in dialing context<BR>> ;add function here to
continue ring tone when 9 is dialed<BR>> ;<BR>>
ignorepat=>9<BR>> exten =>
_91700XXXXXXX,1,Dial(IAX2/$@iaxtel.com/$@iaxtel:1)<BR>> exten =>
_91888NXXXXXX,1,Dial(IAX2/$@iaxtel.com/$@iaxtel:1)<BR>> exten =>
_91877NXXXXXX,1,Dial(IAX2/$@iaxtel.com/$@iaxtel:1)<BR>> exten =>
_91866NXXXXXX,1,Dial(IAX2/$@iaxtel.com/$@iaxtel:1)<BR>> exten =>
_91800NXXXXXX,1,Dial(IAX2/$@iaxtel.com/$@iaxtel:1)<BR>>
<BR>> Note: IAXTEL_INFO is already defined as
username:password<BR>> <BR>> and here's my iax.conf<BR>>
<BR>> [general]<BR>> port=5036<BR>>
bandwidth=high<BR>> disallow=lpc10<BR>> tos=lowdelay<BR>>
<BR>> ;to register with iaxtel<BR>> register =>
username:password@iaxtel.com<BR>> <BR>> <BR>>
;<BR>> ; Trust Caller*ID Coming from iaxtel.com<BR>> ;<BR>>
[iaxtel]<BR>> type=friend<BR>> context=from-iaxtel<BR>>
auth=cleartext<BR>> ;inkeys=iaxtel<BR>> <BR>>
<BR>> when i make an 800 number call for instance,
registration goes through and iaxtel can find me. <BR>But there is an
endless silence, sort of like an<BR>> endles loop, and the only
output I see is a "timeout on Zap/1-1" and it tries the whole thing
<BR>again...and goes on forever, and the call never goes<BR>>
through. Is there anything wrong with my configuration above?<BR>>
<BR>> thx,<BR>> Chuks.<BR>> <BR>> -------- Original
Message --------<BR>> Subject: RE: [Asterisk-Users] bridging iaxtel
calls to PSTN<BR>> From: "Rich Adamson"
<radamson@routers.com><BR>> Date: Mon, February 21, 2005 3:16
pm<BR>> To: "Asterisk Users Mailing List - Non-Commercial
Discussion"<BR>> <asterisk-users@lists.digium.com><BR>>
<BR>> I think someone did reply to this. Don't bother trying to use
iaxtel for<BR>> your connections. Its down far more then its
up.<BR>> <BR>> If you want help setting up an iax connection
directly between your two<BR>> systems, then post what you've got
that pertains to this from iax.conf<BR>> and extensions.conf. No one
is going to be able to help you based on A<BR>> doesn't talk to B
words.<BR>> <BR>> ------------------------<BR>> > could you
help me out with this? I have a posting on this list, bu nobody has
replied yet.<BR>> Titled "why can't I make IAX calls<BR>> >
between 2 asrterisk servers"? I'd appreciate.<BR>> >
<BR>> > -chuks.<BR>> ><BR>> >
-------- Original Message --------<BR>> > Subject:
Re: [Asterisk-Users] bridging iaxtel calls to PSTN<BR>> >
From: "Michael Graves" <mgraves@mstvp.com><BR>> >
Date: Mon, February 21, 2005 7:49 am<BR>> >
To: "Asterisk Users Mailing List - Non-Commercial
Discussion"<BR>> >
<asterisk-users@lists.digium.com><BR>> ><BR>> >
On Sun, 20 Feb 2005 02:43:46 -0700, info@cybernergies.com
wrote:<BR>> ><BR>> > >Hello,<BR>> >
> I just started using asterisk, and have a question.
I have setup two<BR>> > >asterisk servers,
A and B. A has a Digium TDM400 11B card (1 FXO and 1<BR>> >
>FSX modules) and is connected to the PSTN. B has same, but is
NOT<BR>> > >connected to PSTN. I want to
configure B to call A via iaxtel, and<BR>> >
>connect to the PSTN using A's line. How can I configure iaxtel
dial<BR>> > >plan for B in extensions.conf? I
want to be able to make a call to<BR>> > >local
US number (where A is located) from B, using iaxtel. Can anyone<BR>>
> >please help me? All I have seen so far is just
making calls from A to B<BR>> > >and vice versa
using the iaxtel 1700 number, but I haven't seen any<BR>> >
>examples of how to bridge the iaxtel calls to PSTN.
Help please.<BR>> > ><BR>> >
><BR>> > >chuks.<BR>> >
><BR>> > >NB: I don't mean toll free number,
I mean just local dialing.<BR>> > ><BR>>
><BR>> > Don't bother with IAXTel. It's very
frequently down. Just have each<BR>> > server
register with the other and trunk between them. That way you<BR>>
> just use dialplan logic to make the A place a call
on B's resource. The<BR>> > wiki has a good section
on trunking between servers ova IAX.<BR>> ><BR>> >
Michael<BR>> ><BR>> > --<BR>> >
Michael Graves
mgraves@pixelpower.com<BR>> > Sr. Product
Specialist
www.pixelpower.com<BR>> >
Pixel Power Inc.
mgraves@mstvp.com<BR>> ><BR>> >
o713-861-4005<BR>> > o800-905-6412<BR>> >
c713-201-1262<BR>> ><BR>> >
_______________________________________________<BR>> >
Asterisk-Users mailing list<BR>> >
Asterisk-Users@lists.digium.com<BR>> >
http://lists.digium.com/mailman/listinfo/asterisk-users<BR>> >
To UNSUBSCRIBE or update options visit:<BR>> >
http://lists.digium.com/mailman/listinfo/asterisk-users<BR>>
---------------End of Original Message-----------------<BR>>
<BR>> _______________________________________________<BR>>
Asterisk-Users mailing list<BR>>
Asterisk-Users@lists.digium.com<BR>>
http://lists.digium.com/mailman/listinfo/asterisk-users<BR>> To
UNSUBSCRIBE or update options visit:<BR>>
http://lists.digium.com/mailman/listinfo/asterisk-users<BR>---------------End
of Original
Message-----------------<BR><BR><BR>_______________________________________________<BR>Asterisk-Users
mailing
list<BR>Asterisk-Users@lists.digium.com<BR>http://lists.digium.com/mailman/listinfo/asterisk-users<BR>To
UNSUBSCRIBE or update options visit:<BR>
http://lists.digium.com/mailman/listinfo/asterisk-users </BLOCKQUOTE>