<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<font face="Times New Roman, Times, serif">All you really need is a two
wire/two pin cable with a 6 position modular plug on each end (
incorrectly referenced frequently as an RJxx ) Simply plug into the
desired 8 position connectors, and the PSTN wall connection. If you
are not US, then it's up to you to find the dialtone from the PSTN<br>
I asked Digium for a pinout of the 8 position modular connectors on
the TDM card, and never received a response.<br>
It would seem that only the two center pins ( 4 & 5 ) are used, but
I can't be sure of that.<br>
<br>
Digium doesn't seem to know much about this card, as I was told by one
support person in no uncertain terms that the FXS module did NOT work
in a ground start mode, and have since proven that is not the case.<br>
Another user was told that it "should work"<br>
The FXS module absolutely can be configured as ground start. What the
configuration does at call termination is not yet known.<br>
Ground start is an important feature for those of us who are using
Asterisk as an interface to our electromechanical switches,
interconnecting in a private collectors network.<br>
</font><br>
John Novack<br>
Michael Welter wrote:<br>
<blockquote cite="mid4215F29D.7060006@introspect.com" type="cite">Chris
Blake wrote:
<br>
<blockquote type="cite">Greetings *`s,
<br>
<br>
I have a Digium TDM01B card which I want to connect to a standard phone
<br>
socket on the wall, for the purposes of testing Asterisk@home.
<br>
<br>
On the 4 pin connector going to the wall socket, I have the wires from
a
<br>
CAT5 cable inserted as follows :
<br>
<br>
Brown/White - Blue/White - Blue - Brown
<br>
<br>
On the 8 pin connector going to the back of the Digium card, how would
I
<br>
position all 8 of the wires ?
<br>
<br>
</blockquote>
Get a standard RJ14 cable--the kind with a two-pair (four wire)
connector at each end. You can plug the RJ14 into the RJ45 socket on
the TDM card.
<br>
_______________________________________________
<br>
Asterisk-Users mailing list
<br>
<a class="moz-txt-link-abbreviated" href="mailto:Asterisk-Users@lists.digium.com">Asterisk-Users@lists.digium.com</a>
<br>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
<br>
To UNSUBSCRIBE or update options visit:
<br>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
<br>
<br>
<br>
<br>
<br>
</blockquote>
</body>
</html>