<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>
<DIV>I am trying to setup an Asterisk based phone system where all
extensions are on ATA running SIP protocol. And the CO lines are connected to
Didium WildCards. I am using WildCard TDM400 for FXO connection to POTS
line from SBC. I have tried different loop start signalings with the same
result. The WildCard TDM400 has three FXO ports and one FXS port. I also have
another X100P for an additional FXO port.</DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>The problem happens when I attempt to dial an outside line from an
extension. The extension is an analogue phone connected to a SIP ATA. About
one in three attempts will go though. Other times I will get message from
SBC that the call has failed.</DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I suspect Asterisk did not give enough time for the
CO line to react to "Off-Hook" signal. Does anyone knows for sure? And if there
is any parameter to change the time somewhere?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>Henry Ngai</DIV></DIV></BODY></HTML>