<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2180" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hi,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Would someone assist me with the configuration of
my TMD10B and X100P cards? I would ask Digium but my support was good for only
one install...( I had to rebuild my * box). I wrote down the configuration but I
must have made a mistake somewhere. I have followed the instructions on
the Digium site but I must be missing something. Here's the config (snippets)
I've been attempting to use:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><STRONG>/etc/zaptel.conf</STRONG> </DIV>
<DIV><EM>fxsks=1 # X100P<BR>fxoks=2-5 the FXS(green) module is closest to the
bracket if you are looking at the side of the card with all of the electronic
components.<BR>defaultzone=us<BR>loadzone=us</EM><BR></DIV>
<DIV><FONT face=Arial
size=2><STRONG>/etc/asterisk/zapata.conf</STRONG></FONT></DIV>
<DIV> </DIV>
<DIV><EM>echocancel=yes ; You can set this to 32, 64, or 128, tweak to your
needs.<BR>echocancelwhenbridged=yes<BR>echotraining=400 ; Asterisk trains to the
beginning of the call, number is in
milliseconds<BR>callerid=asreceived<BR>signalling=fxs_ks
group=1<BR>context=incoming ; Points to the incoming context of your
extensions.conf <BR>channel => 1<BR><BR>signalling=fxo_ks<BR>callerid=<YOUR
CallerID><BR>group=2<BR>context=default<BR>channel=> 2-5</EM></DIV>
<DIV><EM></EM> </DIV>
<DIV>When I run ztcfg -v I get an error message which says ZT_CHANCONFIG failed
on channel 2: invalid argument. Did you forget that FXS interfaces are
configured with FXO signalling and that FXO interfaces use FXS signalling?</DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>What am I doing wrong?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Mike</FONT></DIV></BODY></HTML>