<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2523" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Ok, I've seen discussion before on doing transfers
(attended and unattended), there seems to be much confusion over
it.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>As things sit, I've been trying (unsuccessfully) to
do transfers with a zap channel (analog phone attached to TDM400). I have
no idea what I'm missing. My current understanding is that I need to have
transfer=yes in zapata.conf, do a flash hook, dial the 2nd number, flash hook
again and we're linked (attended). Then if I hang up the call will
be transfered.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>However, when I try to do this things don't
work. Here's what I do:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>- connection is made between Zap/3 (analog phone)
and Zap/1 (outside line).</FONT></DIV>
<DIV><FONT face=Arial size=2>- flash hook to get dialtone (I do get
dialtone)</FONT></DIV>
<DIV><FONT face=Arial size=2>- attempt to transfer to extension 7007 - I dial
7007</FONT></DIV>
<DIV><FONT face=Arial size=2>- after dialing the 2nd zero, and before dialing
the 2nd seven, I hear Asterisk announce (seven - zero - one) and then Zap/3 is
hung up (I get a busy signal). Zap/1 gets parked.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here's what the log shows:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> -- Zap/1-1 answered
Zap/3-1<BR> -- Attempting native bridge of Zap/3-1 and
Zap/1-1<BR> -- Started three way call on channel
1<BR> -- Started music on hold, class 'default', on
Zap/3-1<BR> -- Attempting native bridge of Zap/3-1 and
Zap/1-1<BR> -- Starting simple switch on
'Zap/1-2'<BR> -- Started music on hold, class 'default', on
Zap/3-1<BR> == Parked Zap/3-1 on 701. Will timeout back to dostuff,7001,1
in 45 seconds<BR> -- Added extension '701' priority 1 to
parkedcalls<BR> -- Playing 'digits/7' (language
'en')<BR> -- Hungup 'Zap/1-1'<BR> == Spawn extension
(dostuff, 7001, 1) exited non-zero on
'Parked/Zap/3-1<ZOMBIE>'<BR> -- Stopped music on hold on
Parked/Zap/3-1<ZOMBIE><BR> -- Playing 'digits/0'
(language 'en')<BR> -- Playing 'digits/1' (language
'en')<BR> -- Parking call to 'Zap/1-2'<BR>
-- Hungup 'Zap/1-2'<BR> -- Stopped music on hold on
Zap/3-1<BR> == Zap/3-1 got tired of being parked<BR> --
Hungup 'Zap/3-1'</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I'm not sure what I'm missing. Apparently
something to do with parked calls, so I must be misunderstanding how do to the
call transfer.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I've also tried enabling Asterisk transfer on the
channel (exten => 7010,1,Dial(${CORDLESS},20,tT)).</FONT></DIV>
<DIV><FONT face=Arial size=2>My understanding of this method is that this allows
one to hit the pound (#) to start a transfer. Yet pound does
nothing. Is it fair to assume that the tT only works on SIP channels, or
am I missing something else.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any help is much appreciated....</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Paul</DIV>
<DIV><BR></DIV></FONT></BODY></HTML>