<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<font face="Arial"><br>
I'd plug four telephones in these lines and test if the lines are
really engaged or not and in case it is busy, the other will ring or it
will bring you to the voicemail. I ha a similiar problem, the telco had
no engaged the lines properly, after this was solved , I also had a
damaged FXO channel.<br>
Can't you replace the card and see what happens? The telco could
also have sold more lines that the switch really supports, thus causing
sometimes this problem. I have seen this happening with my local telcos.<br>
<br>
[]s.<br>
</font><br>
Jim Van Meggelen wrote:
<blockquote cite="mid018801c4d847$005a92f0$6e01a8c0@xp2400" type="cite">
<pre wrap=""><a class="moz-txt-link-abbreviated" href="mailto:asterisk-users-bounces@lists.digium.com">asterisk-users-bounces@lists.digium.com</a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hi all,
Several months ago we built an * box with a quad-FXO tdm400p
(REV e/f).
</pre>
<blockquote type="cite">
<pre wrap="">From the get-go, there has been a problem where occasionally
</pre>
</blockquote>
<pre wrap="">(2-3 times
a week) zaptel/* will not detect the ringing on a line. (The
call will ring through to telco voicemail).
The problem is not specific to a single line or FXO port on the
tdm400p.
I have 2 theories:
#1 - the ring voltage for some calls is below acceptable levels
</pre>
</blockquote>
<pre wrap=""><!---->
Possible, but also possible that there is too much loss on the circuit.
You can test the ringing voltage with a meter, it needs to be between
90V and 110V.
Beyond that you may need to use a transmission test set (such as a
Wilcom T136B). I got mine for $20 bucks on eBay. Using a butt set and
the test set you'll need to call a 1004Hz source from TELUS and then
check that you're within the following specs:
Loop mA: 23 or better (too hot is no good either, but I
doubt that's your problem)
Circuit loss: between 0 and -8dB. 0 is really too hot, -3 to -6 is
nominal, -8.5 is pushing it, but still within spec.
</pre>
<blockquote type="cite">
<pre wrap="">#2 - the tdm400p card is bad
Assuming #1, can the zaptel driver be tweaked to be more sensitive to
ringing?
Any other ideas or experiences?
Running asterisk/zaptel v1.0.2
Thank you,
</pre>
</blockquote>
<pre wrap=""><!----><a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
_______________________________________________
Asterisk-Users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Asterisk-Users@lists.digium.com">Asterisk-Users@lists.digium.com</a>
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
To UNSUBSCRIBE or update options visit:
<a class="moz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users</a>
</pre>
</blockquote>
<br>
<div class="moz-signature">-- <br>
<title>OpSign</title>
<font color="#3366ff">__________________________________________________</font><br>
<table border="0" cellpadding="0" cellspacing="0" width="350">
<tbody>
<tr>
<td valign="top" width="130"> <font color="#000080"
face="Helvetica, Arial, sans-serif" size="-1"><b>Alessandro Ren</b></font><br>
</td>
<td valign="top" width="220"> <font color="#000080"
face="Helvetica, Arial, sans-serif" size="-1"><i><b>OpServices</b></i></font><br>
<font color="#808080" face="Helvetica, Arial, sans-serif"
size="-1"><i><b>Luciana de Abreu, 471 - Sala 403</b></i></font><br>
<font color="#808080" face="Helvetica, Arial, sans-serif"
size="-1"><i><b>Porto Alegre, RS - CEP 90570-060</b></i></font><br>
</td>
</tr>
</tbody>
</table>
<table border="0" cellpadding="0" cellspacing="0" width="350">
<tbody>
<tr>
<td valign="middle" width="180"> <font color="#000000"
face="Wingdings" size="-3"><b>(</b></font><font color="#999999"
face="Helvetica, Arial, sans-serif" size="-3"> phone 55(51)3061-3588</font><br>
<font color="#000000" face="Wingdings" size="-3"><b>4</b></font><font
color="#999999" face="Helvetica, Arial, sans-serif" size="-3"> fax 55(51)3061-3588</font><br>
</td>
<td valign="middle" width="200"> <font color="#000000"
face="Wingdings" size="-3"><b>Q</b></font><font color="#999999"
face="Helvetica, Arial, sans-serif" size="-3"> mobile 55(51)9807-3255</font><br>
<font color="#000000" face="Wingdings" size="-3"><b>:</b></font><font
color="#999999" face="Helvetica, Arial, sans-serif" size="-3"> email <a
href="mailto:%22alessandro.ren@opservices.com.br%22">alessandro.ren@opservices.com.br</a></font><br>
</td>
</tr>
</tbody>
</table>
<font color="#3366ff">__________________________________________________</font><br>
</div>
</body>
</html>