<br><font size=2 face="sans-serif">Why go to all the trouble?</font>
<br>
<br><font size=2 face="sans-serif">Hylafax does all the fax client, file
conversion, printing, emailing,faxback, etc. Its a very good enterprise
fax server package. Why not try and interface asterisk and hylafax more
closely?</font>
<br>
<br><font size=2 face="sans-serif">This is why I have been looking at t38modem,
but alas it does not seem to provide the solution. Ideally a voipfax modem
device is needed (looks like a modem, behaves like a modem but works on
a sip channel and not isdn/analog line) then asterisk can treat it like
any other extension, and hylafax can treat it like a modem.</font>
<br>
<br><font size=2 face="sans-serif">Sam</font>
<br>
<br><font size=2><tt>"Michel Belleau (malaiwah.com)" <michel.belleau@malaiwah.com>
wrote on 29/09/2004 12:43:15:<br>
<br>
> Hi Alex.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> I'm pretty sure that it can be done with a simple
AGI script following the <br>
> rxfax action in the extensions.conf file.</tt></font>
<br><font size=2><tt>> I could make it, but I'm busy on another things
this week.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> The only caveat of this setup is really "SpanDSP";
on my tests it received <br>
> faxed "squished" like 200% width and 100% width. I know
that I can resize de <br>
> resulting TIFF file afterwards, but I think there's something wrong
with my <br>
> spandsp setup first.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> Mike</tt></font>
<br><font size=2><tt>> <br>
> _____ </tt></font>
<br><font size=2><tt>> <br>
> De : asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-<br>
> bounces@lists.digium.com] De la part de Alex Barnes</tt></font>
<br><font size=2><tt>> Envoyé : 29 septembre, 2004 07:31</tt></font>
<br><font size=2><tt>> À : Asterisk Users Mailing List - Non-Commercial
Discussion</tt></font>
<br><font size=2><tt>> Objet : RE: [Asterisk-Users] * and Fax</tt></font>
<br><font size=2><tt>> <br>
> I have only started to "play" with * over the last couple
of weeks so you will<br>
> have to forgive any newbisms or mistakes on my part. :-)</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> It seems to me (or at least in my idea of a utopian
office) that the end goal <br>
> should be to replace all the physical fax machines.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> Receiving can currently be done by converting
into a TIFF / PDF and then <br>
> emailing to an address depending on the DDI, right?? This is
great but could <br>
> be improved by sending it straight to a networked printer depending
on the DDI<br>
> (U.S. DID right?) used by the sender. (The company I am doing
this feasability<br>
> study / research for have multiple departments most with a fax
machine.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> But what would be really cool was if they could
send faxs directly from their <br>
> PC's (Windows).</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> I am also not really an expert on Linux either
(tho learning loads) and if <br>
> someone knows how this can be done via AGI scripts and what not I
would be <br>
> very interested to know.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> cheers</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> Alex</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> <br>
> -----Original Message-----</tt></font>
<br><font size=2><tt>> From: slwatts@winckworths.co.uk [mailto:slwatts@winckworths.co.uk]
</tt></font>
<br><font size=2><tt>> Sent: 29 September 2004 12:02</tt></font>
<br><font size=2><tt>> To: jorn@ccl-network.com; Asterisk Users Mailing
List - Non-Commercial Discussion</tt></font>
<br><font size=2><tt>> Subject: Re: [Asterisk-Users] * and Fax</tt></font>
<br><font size=2><tt>> <br>
> Hi, </tt></font>
<br><font size=2><tt>> <br>
> I think this is one area that needs to be developed. I am curently
<br>
> implementing a system for my home so cannot really justify the cost
of <br>
> financially supporting the development of this when all I really need
to do is<br>
> buy a telephone extension lead for my existing fax modem!!! </tt></font>
<br><font size=2><tt>> <br>
> I am more than willing to devote some testing/documentation time (I
am not <br>
> really a programmer) if that helps. </tt></font>
<br><font size=2><tt>> <br>
> Faxing is an important facility for many businesses tho, and it would
make <br>
> sense to be able to handle a fax call directly from asterisk to hylafax
<br>
> without having to route it via some analog device on the same machine
(eg. <br>
> pstn -> voip ->fax svr-> email rather than pstn -> voip
-> analog line ->fax <br>
> svr ->email) </tt></font>
<br><font size=2><tt>> <br>
> Am i barking up the wrong tree or do others also need this functionality?
</tt></font>
<br><font size=2><tt>> <br>
> Sam </tt></font>
<br><font size=2><tt>> <br>
> Jørn Eriksen <jorn@ccl-network.com> wrote on 29/09/2004 10:35:30:</tt></font>
<br><font size=2><tt>> <br>
> > Hi all, </tt></font>
<br><font size=2><tt>> > </tt></font>
<br><font size=2><tt>> > I've read a bit lately on Asterisk &
Fax issues - I also saw, in some </tt></font>
<br><font size=2><tt>> > notes from Astricon, that the developer
of panDSP - Steve Underwood - </tt></font>
<br><font size=2><tt>> > was looking for support (finacial and/or
technical). If we are enough </tt></font>
<br><font size=2><tt>> > folks that need/want this (fax for *) we
might get him to streamline it </tt></font>
<br><font size=2><tt>> > for a reasonable abount pr head.... </tt></font>
<br><font size=2><tt>> > </tt></font>
<br><font size=2><tt>> > Best regards </tt></font>
<br><font size=2><tt>> > Jorn </tt></font>
<br><font size=2><tt>> > ---------------------------------------------
</tt></font>
<br><font size=2><tt>> > slwatts@winckworths.co.uk wrote: </tt></font>
<br><font size=2><tt>> > </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > zapata.conf? Must have missed that
- but I am not using any analog </tt></font>
<br><font size=2><tt>> > > cards, I am using capi. If this feature
dependent on using zapata and </tt></font>
<br><font size=2><tt>> > > compatible hardware then? </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > on a slightly different tack - tried
the sipura 3000 last night, has </tt></font>
<br><font size=2><tt>> > > anyone got this working with faxes.
Set all the fax detection tones to </tt></font>
<br><font size=2><tt>> > > yes, but it still treats a fax call
just like any other voice call :-( </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > Thanks, </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > Sam. </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > Jon Radon <jonr800@gmail.com>
wrote on 28/09/2004 16:52:32: </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > > After you changed the zapata.conf
per the wiki... make sure you stop </tt></font>
<br><font size=2><tt>> > > > asterisk, unload your zap
drivers, reload them, then start asterisk </tt></font>
<br><font size=2><tt>> > > > again. </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > ----- Original Message -----
</tt></font>
<br><font size=2><tt>> > > > From: slwatts@winckworths.co.uk
<slwatts@winckworths.co.uk> </tt></font>
<br><font size=2><tt>> > > > Date: Tue, 28 Sep 2004 11:34:33
+0100 </tt></font>
<br><font size=2><tt>> > > > Subject: [Asterisk-Users]
Asterisk, Hylafax and T38Modem - help! </tt></font>
<br><font size=2><tt>> > > > To: Asterisk Users Mailing
List - Non-Commercial Discussion </tt></font>
<br><font size=2><tt>> > > > <asterisk-users@lists.digium.com>
</tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > Hi All, </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > I know that this may not
strictly be an asterisk issue, but if anyone </tt></font>
<br><font size=2><tt>> > > > has any ideas on this prob
it would be appreciated. </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > I have a working asterisk
setup using Suse 9.1, a BT ISDN BRI card </tt></font>
<br><font size=2><tt>> > > > (Fritz?), sipura 3000 and
a few cisco 7940's. I wanted to do add </tt></font>
<br><font size=2><tt>> > > > faxing into the equation,
so I thought I would try and setup the </tt></font>
<br><font size=2><tt>> > > > following: </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > PSTN->asterisk->hylafax->pc
</tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > At the moment asterisk and
hylafax are on the same box. I went and </tt></font>
<br><font size=2><tt>> > > > installed t38modem, hylafax,
openh323 and so on.... got chan_oh323 </tt></font>
<br><font size=2><tt>> > > > compiled and installed.
</tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > I can now dial an extension
- it gets routed to t38modem, it picks up </tt></font>
<br><font size=2><tt>> > > > but I hear no modem tones
(screeching) just silence. when I dial it </tt></font>
<br><font size=2><tt>> > > > with a fax machine the fax
machine just says 'no carrier'. Looking at </tt></font>
<br><font size=2><tt>> > > > the hylafax logs I see t38modem
answer but then get 'no carrier'. If I </tt></font>
<br><font size=2><tt>> > > > make t38modem dial an extension
all I hear is a </tt></font>
<br><font size=2><tt>> > > > beeep.......beeep......beeep
of a fax machine. </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > Also when I try to use fax
tone detection in my exensions.conf it </tt></font>
<br><font size=2><tt>> > > > doesnt work - the call is
always routed to the normal sip device and </tt></font>
<br><font size=2><tt>> > > > not the t38modem (oh323)
device. I have followed the examples on the </tt></font>
<br><font size=2><tt>> > > > wiki. </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > Am I doing something fundamentally
wrong here? Do I also need to load </tt></font>
<br><font size=2><tt>> > > > faxcapi? I have not yet
tried using the sipaura 3000 to pick up the </tt></font>
<br><font size=2><tt>> > > > incoming fax call - I will
try that later. </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > > Cheers, </tt></font>
<br><font size=2><tt>> > > > </tt></font>
<br><font size=2><tt>> > > >* * </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > *Winckworth Sherwood* Solicitors and
Parliamentary Agents </tt></font>
<br><font size=2><tt>> > > DX 148400 WESTMINSTER 5 : 35 Great
Peter Street, London SW1P 3LR </tt></font>
<br><font size=2><tt>> > > Telephone 020 7593 5000 Fax 020 7593
5099 </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > *Confidentiality* </tt></font>
<br><font size=2><tt>> > > This email message and any attachments
are confidential; they may be </tt></font>
<br><font size=2><tt>> > > subject to legal professional privilege
and are intended for the named </tt></font>
<br><font size=2><tt>> > > recipient only. If you are not the
named recipient, please return the </tt></font>
<br><font size=2><tt>> > > message and enclosures immediately
and delete them from your system. </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > * * </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > *Caution* </tt></font>
<br><font size=2><tt>> > > Before advice received only by email
(whether by attachment or </tt></font>
<br><font size=2><tt>> > > otherwise) may be relied on, the authenticity
of the communication must </tt></font>
<br><font size=2><tt>> > > be verified by means independent of
email. * * </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > *Regulation* </tt></font>
<br><font size=2><tt>> > > The firm is regulated by the Law Society.
</tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > *Partners* </tt></font>
<br><font size=2><tt>> > > A list of partners is available for
inspection at each office of the </tt></font>
<br><font size=2><tt>> > > firm and on the firm's website at www.winckworths.co.uk
</tt></font>
<br><font size=2><tt>> > > <http://www.winckworths.co.uk>
</tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > ------------------------------------------------------------------------
</tt></font>
<br><font size=2><tt>> > > </tt></font>
<br><font size=2><tt>> > > _______________________________________________
</tt></font>
<br><font size=2><tt>> > > Asterisk-Users mailing list </tt></font>
<br><font size=2><tt>> > > Asterisk-Users@lists.digium.com </tt></font>
<br><font size=2><tt>> > > http://lists.digium.com/mailman/listinfo/asterisk-users
</tt></font>
<br><font size=2><tt>> > > To UNSUBSCRIBE or update options visit:
</tt></font>
<br><font size=2><tt>> > > http://lists.digium.com/mailman/listinfo/asterisk-users
</tt></font>
<br><font size=2><tt>> > </tt></font>
<br><font size=2><tt>> > _______________________________________________
</tt></font>
<br><font size=2><tt>> > Asterisk-Users mailing list </tt></font>
<br><font size=2><tt>> > Asterisk-Users@lists.digium.com </tt></font>
<br><font size=2><tt>> > http://lists.digium.com/mailman/listinfo/asterisk-users
</tt></font>
<br><font size=2><tt>> > To UNSUBSCRIBE or update options visit:
</tt></font>
<br><font size=2><tt>> > http://lists.digium.com/mailman/listinfo/asterisk-users
</tt></font>
<br><font size=2><tt>> <br>
> Winckworth Sherwood Solicitors and Parliamentary Agents </tt></font>
<br><font size=2><tt>> DX 148400 WESTMINSTER 5 : 35 Great Peter Street,
London SW1P 3LR Telephone 020<br>
> 7593 5000 Fax 020 7593 5099 </tt></font>
<br><font size=2><tt>> <br>
> Confidentiality </tt></font>
<br><font size=2><tt>> This email message and any attachments are confidential;
they may be subject <br>
> to legal professional privilege and are intended for the named recipient
only.<br>
> If you are not the named recipient, please return the message and
enclosures <br>
> immediately and delete them from your system.</tt></font>
<br><font size=2><tt>> <br>
> Caution </tt></font>
<br><font size=2><tt>> Before advice received only by email (whether
by attachment or otherwise) may <br>
> be relied on, the authenticity of the communication must be verified
by means <br>
> independent of email. </tt></font>
<br><font size=2><tt>> <br>
> Regulation </tt></font>
<br><font size=2><tt>> The firm is regulated by the Law Society. </tt></font>
<br><font size=2><tt>> <br>
> Partners </tt></font>
<br><font size=2><tt>> A list of partners is available for inspection
at each office of the firm and <br>
> on the firm's website at www.winckworths.co.uk <http://www.winckworths.co.uk></tt></font>
<br><font size=2><tt>> <br>
> Dear Friends of Ubiquity Software: </tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> As you may have noticed, Ubiquity Software began
using the web domain <br>
> ubiquity.com earlier this year in addition to the previously established
<br>
> ubiquity.net for our website and email communications to you.
However, since <br>
> that time, a dispute has emerged with respect to actual ownership of
the <br>
> ubiquity.com domain.</tt></font>
<br><font size=2><tt>> <br>
> </tt></font>
<br><font size=2><tt>> As an international software company founded
over decade ago, you can always <br>
> reach Ubiquity Software under the website www.ubiquity.net < http://www.ubiquity.net/
<<br>
> http://www.ubiquity.net/>> and via email at @ubiquity.net.
However, we have <br>
> also chosen to expand our domain to the more specific www.ubiquitysoftware.com
< <br>
> http://www.ubiquitysoftware.com/ <http://www.ubiquitysoftware.com/>>
for web <br>
> and @ubiquitysoftware.com for email communications.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> Please use either the historical ubiquity.net
or begin to use the new <br>
> ubiquitysoftware.com domain for all email communications to Ubiquity
employees<br>
> from now on. </tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> Thank you.</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> Regards,</tt></font>
<br><font size=2><tt>> </tt></font>
<br><font size=2><tt>> Ubiquity Software </tt></font>
<br><font size=2><tt>> www.ubiquitysoftware.com < http://www.ubiquitysoftware.com/
<http://www.<br>
> ubiquitysoftware.com/>> </tt></font>
<br><font size=2><tt>> info@ubiquitysoftware.com <mailto:info@ubiquitysoftware.com>
</tt></font>
<br><font size=2><tt>> <br>
> ---</tt></font>
<br><font size=2><tt>> Incoming mail is certified Virus Free.</tt></font>
<br><font size=2><tt>> Checked by AVG anti-virus system (http://www.grisoft.com).</tt></font>
<br><font size=2><tt>> Version: 6.0.769 / Virus Database: 516 - Release
Date: 2004-09-24</tt></font>
<br><font size=2><tt>> <br>
> ---</tt></font>
<br><font size=2><tt>> Outgoing mail is certified Virus Free.</tt></font>
<br><font size=2><tt>> Checked by AVG anti-virus system (http://www.grisoft.com).</tt></font>
<br><font size=2><tt>> Version: 6.0.769 / Virus Database: 516 - Release
Date: 2004-09-24</tt></font>
<br><font size=2><tt>> <br>
> [attachment "ATT35027.txt" deleted by Samuel Luxford-Watts/Winckworths]
</tt></font><font COLOR="#0000ff"><b>
<p>Winckworth Sherwood</b></font> <font FACE="Verdana" SIZE="2">Solicitors and
Parliamentary Agents
<br />DX 148400 WESTMINSTER 5 : 35 Great Peter Street, London SW1P 3LR
Telephone 020 7593 5000 Fax 020 7593 5099
</font></p>
<p><b>Confidentiality</b>
<br />This email message and any attachments are confidential; they may be subject
to legal professional privilege and are intended for the named recipient only.
If you are not the named recipient, please return the message and enclosures
immediately and delete them from your system.</p>
<b>
<p>Caution</b>
<br />Before advice received only by email (whether by attachment or otherwise) may
be relied on, the authenticity of the communication must be verified by means
independent of email.
<b>
<p>Regulation</b>
<br />The firm is regulated by the Law Society. </p>
<p><b>Partners</b>
<br />A list of partners is available for inspection at each office of the firm and
on the firm's website at</font>
<a HREF="http://www.winckworths.co.uk">www.winckworths.co.uk</a></p>
</font>