<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1276" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello to the list again.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have my ATA behind NAT connecting to * then calls
are fwd to Cisco 2600. Calls are completing, I just cannot figure out why
I don't hear any ALERTING signals from the 2600 (ringback, fast busy, SIT,
etc). Audio works fine though. I'm using G711ulaw. And I don't
want ATA or * to provide the false ringback so I took out ('r') in my Dial
command. Existing command is as follows:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial
size=2>exten=>_.,1,Dial(SIP/${EXTEN},20,tH)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I hope somebody out there could help me on
this. Thanks.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>