<br><font size=2 face="sans-serif">Hi</font>
<br><font size=2 face="sans-serif">We interfaced our ASCOTEL PBX to Asterisk. by EuroISDN PRI , DSS1</font>
<br><font size=2 face="sans-serif">It works fine on channels 1- 15, but on 17-31 the miststood each other.</font>
<br><font size=2 face="sans-serif">Asterisk speaks in Timeslots, the PBX in B-channels</font>
<br>
<br><font size=2 face="sans-serif">The signalling is ok, but the bridging is shifted. The first incoming connection is bridged to "nirwana" also no indication is hearable,</font>
<br><font size=2 face="sans-serif">calling a second internal subcribes bridges them to the first.</font>
<br>
<br><font size=2 face="sans-serif">The PBX sends a SETUP message with channel identification 30 and Asterisk bridges them to Zap-30, instead of Zap-31. </font>
<br>
<br><font size=2 face="sans-serif">The configuration</font>
<br><font size=2 face="sans-serif">- Digium TE410p card, set for E1</font>
<br>
<br><font size=2 face="sans-serif">________in zaptel.conf________</font>
<br><font size=1 face="Courier New">span=1,1,1,ccs,hdb3,crc4</font>
<br>
<br><font size=1 face="Courier New">bchan=1-15</font>
<br><font size=1 face="Courier New">dchan=16</font>
<br><font size=1 face="Courier New">bchan=17-31</font>
<br><font size=2 face="sans-serif">________in zapata.conf________</font>
<br><font size=1 face="Courier New">signalling => pri_cpe</font>
<br><font size=1 face="Courier New">switchtype => euroisdn</font>
<br><font size=1 face="Courier New">context => pri1-in</font>
<br><font size=1 face="Courier New">pridialplan => unknown </font>
<br><font size=1 face="Courier New">channel => 1-15</font>
<br><font size=1 face="Courier New">channel => 17-31</font>
<br>
<br>
<br><font size=2 face="sans-serif">What's wrong? </font>
<br><font size=2 face="sans-serif">Thanks in advance</font>
<br>
<br><font size=2 face="sans-serif">Roman</font>
<br>