<P>hi Everyone,</P>
<P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P>
<P>*CLI> <BR> == D-Channel on span 1 up<BR> -- B-channel 1 successfully restarted on span 1<BR> -- B-channel 2 successfully restarted on span 1<BR> . . .<BR> -- B-channel 31 successfully restarted on span 1</P>
<P>but, when we make a call to this E1 from outside, it gives the following error,</P>
<P>WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not found?<BR>WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 1<BR>WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call specified, but not found?<BR>WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 2</P>
<P>does anybody hav an idea on this?</P>
<P>our zaptel.conf is,</P>
<P>#E100p card<BR>span=1,0,0,ccs,hdb3,crc4<BR>bchan=1-15,17-31<BR>dchan=16</P>
<P>zapata.conf,</P>
<P>;E100p card<BR>switchtype=EuroISDN<BR>signalling=pri_cpe<BR>pridialplan=unknown<BR>context=incoming<BR>group = 2<BR>channel => 1-15,17-31</P>
<P>Thanks inadvance,</P>
<P>Surajee</P><br>
--------------This mail sent through OmniBIS.com--------------