[asterisk-users] Problems with inbound connection and registering phone

[Henning Follmann]

On Tue, May 23, 2023 at 02:24:02PM -0400, Steve Matzura wrote:
> I have two problems. The first is that when I dial my number from a phone on
> the Internet or any phone outside my LAN, Asterisk does not respond in any
> way, which means somehow my system is not picking up the fact that there's
> an incoming call to it.
> 
> 
> The second problem is that I thought I'd try an internal phone to see if I
> could get the hello-world stuff working at the least. I thought I'd try
> Zoiper, but none of the download buttons at
> https://www.zoiper.com/en/voip-softphone/download/current did anything when
> clicked, so I set up a spare line on a Yealink TA33 phone that is connected
> to another much much older Asterisk implementation running a piece of
> amateur radio gear called Allstar. The version of Asterisk used in the
> Allstar project is ancient--like 1.4 or 1.6--and the configuration syntax
> and options are quite different, so I didn't get lulled into thinking I'd
> just clone that configuration on my newer Asterisk implementation.
> 
> 
> The "Definitive Guide" shows everything about adding phones as SQL
> statements, so I made some educated guesses as to what to put into
> pjsip.conf. Something's obviously wrong because the phone won't authenticate
> (see below).
> 
> 
> Here's how I set it up in pjsip.
> 
> 
> [yealink]
> transport=udp
> type=auth
> auth_type=userpass
> username=Steve
> password=Steve
>

[yealink]
type=aor


 
> [yealink]
> type = endpoint
> transport = transport-udp
> context = phones
> disallow = all
> allow = ulaw
> ; allow=g729                 ; uncomment if you support g729
> auth = yealink
> aors = yealink
> 
> 
> Here's how I set it up in extensions:
> 
> 
> [phones]
> exten => 101,1,Dial(PJSIP/yealink)
> 
> Here's the error I get on the Asterisk console:
> 
> 
> [May 23 13:42:56] NOTICE[45189]: res_pjsip/pjsip_distributor.c:676
> log_failed_request: Request 'REGISTER' from '"Steve"
> <sip:Steve at 192.168.1.185>' failed for '192.168.1.228:5060' (callid:
> 0_1554187534 at 192.168.1.228) - Failed to authenticate
> 
> 
> What did I omit?
> 
> 
> -- 
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> Check out the new Asterisk community forum at: https://community.asterisk.org/
> 
> New to Asterisk? Start here:
>      https://wiki.asterisk.org/wiki/display/AST/Getting+Started
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Henning Follmann           | hfollmann at itcfollmann.com