[asterisk-users] Odd issue CentOS 7 vs Ubuntu 20.04

[Jerry Geis]

On Wed, Feb 2, 2022 at 9:26 AM Jerry Geis <jerry.geis at gmail.com> wrote:

> So I have CentOS 7 server running asterisk 18.8.0 - all is good.
>
> I unplug that server - plug in a ubuntu 20.04 server at the same IP
> address.
> let my 3 devices reconnect to the ubuntu server....
>
> When I pick up the polycom phone and dial it connects.
> I hear the other ends 'tone" - but when I press digits - nothing happens
> (to select a port)
> Seems everything is set for rfc2833.
>
> The devices are a TOA SIP Gateway, and a TOA N-8000 device connected to
> the GW.
>
> I have compared the settings of the polycom extension on both boxes - they
> match and also the SIP gateway.
>
> I tried to compare the sip debug from the Ubuntu to the centos and
> "looked" the same to me.
>
> Where might I look next or what might I look at ?
>
> Thanks,
>
> Jerry
>


ok - if I "rtp set debug on " on the CentOS 7 server I get a tone of
logging.

if I do the same on the ubuntu 20.04 all i get is like 2 lines.
I have done "systemctl stop firewalld" on the ubuntu box - same result.

Where do I look next ?

Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20220202/b383eb79/attachment.html>