[asterisk-users] Hangup() not working for handsets using pls transport?

[Joshua C. Colp]

On Mon, Feb 8, 2021 at 6:14 PM Ruisheng Peng <rpeng at ifa.hawaii.edu> wrote:

> Thanks Jashua for the suggestion.  To find out if the issue was only
> limited to the softphone that was using tls transport (SOFTPHONE_B on ext
> 103, a linphone running off my MBP), I also turned one of the hard phone
> (0000f30A0A01 on ext 100, a Yealink T32G) into using tls transport.  It
> behaves similarly to the linphone in that the Hangup() call in dialplan is
> silently ignored, and the handsets would alway appear as busy/unavilable.
>

Have you configured the devices, on them or using their provisioning, to
use TLS? It does not appear so as they are using UDP, while you're forcing
a TLS transport in Asterisk. This would not work.

-- 
Joshua C. Colp
Asterisk Technical Lead
Sangoma Technologies
Check us out at www.sangoma.com and www.asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20210208/cb15bd80/attachment.html>