[asterisk-users] problems with natted phones

[Marek Greško]

Hello,

it triggered again. Even disabling RTSp ALG did not help. My fantasy
ends here. It agains seems to be reboot triggered on asterisk side.
Not every one. But there was surely one before it was last working.
Reboot of the router on the phone side fixes the problem. Any other
suggestions?

Thanks

Marek


2021-07-26 9:31 GMT+02:00, Marek Greško <mgresko8 at gmail.com>:
> I currently disabled also RTSP ALG and rebooted the router. Fixed for
> now. I do not know for how long.
>
> Marek
>
>
> 2021-07-26 8:54 GMT+02:00, Marek Greško <mgresko8 at gmail.com>:
>> Hmm, back to original problem. My happines was premature. Today one of
>> the phones have no audio again. I see packets from lan segment again.
>>
>> I double checked the router configuration. SIP ALG is disabled. There
>> are also another ALGs present:
>>
>> NAT ALG
>> RTSP ALG
>> PPTP ALG
>> IPSEC ALG
>>
>> Which of them are neede to be disabled?
>>
>> As of my observations these problems are triggered by reboots on
>> asterisk side. How could this be related? (I may be wrong.)
>>
>> Thanks
>>
>> Marek
>>
>>
>>
>> 2021-07-23 14:54 GMT+02:00, Marek Greško <mgresko8 at gmail.com>:
>>> I achieved a partial success adding --use-compact-form option.
>>>
>>> Marek
>>>
>>>
>>> 2021-07-23 13:47 GMT+02:00, Marek Greško <mgresko8 at gmail.com>:
>>>> Hello,
>>>>
>>>> your suggestion to turn off SIP ALG on provider's router was probably
>>>> correct. no problem until now. Thank you very much.
>>>>
>>>> I just found out another issue. I had a pjsue client in that network
>>>> which called specific number when turned on. It was working perfectly
>>>> with the old provider with working SIP ALG. But now with this provider
>>>> and SIP ALG disabled I am not able to make the call using pjsua
>>>> client.
>>>>
>>>> My pjsua config looks like this:
>>>> --id sip:ext at asterisk.domain
>>>> --registrar sip:asterisk.domain
>>>> --proxy sip:asterisk.domain
>>>> --outbound sip:asterisk.domain
>>>> --realm *
>>>> --username username
>>>> --password password
>>>> --null-audio
>>>> --no-tcp
>>>> --max-calls=1
>>>> --no-vad
>>>>
>>>> The pjsua client successfully registers but is unable to call.
>>>>
>>>> I see the following:
>>>> IP address change detected for account 1
>>>> (localip:5060-->nattedip:newport). Updating registration (using method
>>>> 4)
>>>> Temporary failure in sending Request msg INVITE/cseq=...., will try
>>>> next server: Unsupported transport (PJSIP_EUNSUPTRANSPORT)
>>>>
>>>> What could be the problem? How can I convince pjsue to work correctly
>>>> behind nat?
>>>>
>>>> Thanks
>>>>
>>>> Marek
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> 2021-07-10 11:08 GMT+02:00, Marek Greško <mgresko8 at gmail.com>:
>>>>> Hello,
>>>>>
>>>>> I just disabled. Currently it is working. I shloud give it some time
>>>>> to confirm the problem has gone. Maybe one month would be enough to
>>>>> confirm.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Marek
>>>>>
>>>>>
>>>>> 2021-07-09 20:11 GMT+02:00, Abdenasser Ghomri
>>>>> <ghomri.nasser at gmail.com>:
>>>>>> Yes just disable the SIP ALG and see if it helps, Thanks.
>>>>>>
>>>>>> Best Regards,
>>>>>>
>>>>>> On Fri, Jul 9, 2021, 09:10 Antony Stone <
>>>>>> Antony.Stone at asterisk.open.source.it> wrote:
>>>>>>
>>>>>>> On Friday 09 July 2021 at 08:47:46, Marek Greško wrote:
>>>>>>>
>>>>>>> > Hello,
>>>>>>> >
>>>>>>> > yes SIP ALG are anbled on the router. Should I disable?
>>>>>>>
>>>>>>> In my opinion, always.
>>>>>>>
>>>>>>> Antony.
>>>>>>>
>>>>>>> --
>>>>>>> I don't know, maybe if we all waited then cosmic rays would write
>>>>>>> all
>>>>>>> our
>>>>>>> software for us. Of course it might take a while.
>>>>>>>
>>>>>>>  - Ron Minnich, Los Alamos National Laboratory
>>>>>>>
>>>>>>>                                                    Please reply to
>>>>>>> the
>>>>>>> list;
>>>>>>>                                                          please
>>>>>>> *don't*
>>>>>>> CC
>>>>>>> me.
>>>>>>>
>>>>>>> --
>>>>>>> _____________________________________________________________________
>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com
>>>>>>> --
>>>>>>>
>>>>>>> Check out the new Asterisk community forum at:
>>>>>>> https://community.asterisk.org/
>>>>>>>
>>>>>>> New to Asterisk? Start here:
>>>>>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>>>>>
>>>>>>> asterisk-users mailing list
>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>
>>>>>
>>>>
>>>
>>
>