[asterisk-users] Digium TE134 compatibility issues with new Dell server - Zero interrupts

[Richard Reina]

I am getting zero interrupts for a new Digium TE134 Card on a new brand new
Dell T40 server with the latest BIOS. Is there something that I am missing
or is the card not compatible with Dell servers?

(cat /proc/interrupts ; sleep 1 ; cat /proc/interrupts) | grep -i wcte13xp0
  16:          0          0          0          0  IR-IO-APIC   16-fasteoi
  i801_smbus, wcte13xp0
  16:          0          0          0          0  IR-IO-APIC   16-fasteoi
  i801_smbus, wcte13xp0

lsmod | grep wcte13xp
wcte13xp               61440  24
oct612x               184320  1 wcte13xp
dahdi                 241664  74 oct612x,wcte13xp


lspci -vv

03:00.0 Network controller: Digium, Inc. Wildcard TE134 single-span
T1/E1/J1 card (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 32 (1000ns min, 3750ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=128K]
Kernel driver in use: wcte13xp
Kernel modules: wcte13xp

# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.
Table at 0x000E0000.

Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
        Vendor: Dell Inc.
        Version: 1.3.1
        Release Date: 07/03/2020
        Address: 0xF0000
        Runtime Size: 64 kB
        ROM Size: 32 MB


/usr/sbin/dahdi_cfg -vvv
DAHDI Tools Version - 3.1.0

DAHDI Version: 3.1.0
Echo Canceller(s): HWEC
Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 08)
Channel 09: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 09)
Channel 10: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 10)
Channel 11: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 11)
Channel 12: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 12)
Channel 13: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 13)
Channel 14: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 14)
Channel 15: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 15)
Channel 16: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 17)
Channel 18: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 18)
Channel 19: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 19)
Channel 20: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 20)
Channel 21: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 21)
Channel 22: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 22)
Channel 23: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 23)
Channel 24: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 24)

24 channels to configure.

DAHDI_SPANCONFIG failed on span 1: Input/output error (5)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20201022/54a309e9/attachment.html>