[asterisk-users] Voice broken during calls (again...)

[Marek Greško]

Hello,

there is no need to change canreinvite for provider configuration.

Do not change MTU. Probably there will be another problem. I expect
packet size 1466 would pass and higher will have the same result. It
would be interesting to make the same test from the outside towards
your asterisk with size 2 bytes larger the highest you are able to
ping.

Marek


2020-06-22 22:26 GMT+02:00, Luca Bertoncello <lucabert at lucabert.de>:
> Am 22.06.2020 um 22:12 schrieb Marek Greško:
>
> Hi Marek
>
>> Would you mind repeating the test with canreinvite=no set for all you
>> phones and mobile phones?
>
> All my peers have already canreinvite=no...
> I only have canreinvite=yes on the SIP configuration on the Telekom part:
>
> [pbxluca]
> type=peer
> defaultuser=111111111 at t-online.de
> secret= xxxxxxxxxx
> dtmfmode=rfc2833
> host=tel.t-online.de
> context=luca_incoming
> outboundproxy=tel.t-online.de
> port=5060
> fromuser=03511111111
> fromdomain=tel.t-online.de
> usereqphone=yes
> canreinvite=yes
> insecure=port,invite
> nat=no
> qualify=yes
> qualifyfreq=600
> disallow=all
> allow=alaw
> allow=ulaw
>
> Should I change canreinvite=no there?
>
>> What is your upload bitrate? Is it guaranteed?
>
> Currently 12Mbps. Guaranteed should be about 10Mbps...
>
>> I would try also to test the PMTU:
>>
>> Try:
>>
>> ping -M  do -s 2000 ${ip address of the sip server}
>>
>> You should receive icmp asking for lowering the packet size.
>
> root at bpi:/etc/asterisk# ping -M  do -s 2000 tel.t-online.de
> PING tel.t-online.de (217.0.128.133) 2000(2028) bytes of data.
> ping: local error: Message too long, mtu=1492
> ping: local error: Message too long, mtu=1492
> ping: local error: Message too long, mtu=1492
> ping: local error: Message too long, mtu=1492
> ping: local error: Message too long, mtu=1492
> ping: local error: Message too long, mtu=1492
> ^C
> --- tel.t-online.de ping statistics ---
> 6 packets transmitted, 0 received, +6 errors, 100% packet loss, time 5103ms
>
> Mmmm... it seems not good, isn't it?
>
> For information, here the output of ifconfig:
>
> dsl0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1492
>         inet 93.241.x.y  netmask 255.255.255.255  destination 62.156.z.k
>         inet6 fe80::9565:3024:4deb:ebc7  prefixlen 10  scopeid 0x20<link>
>         ppp  txqueuelen 3  (Point-to-Point Protocol)
>         RX packets 852397  bytes 480197087 (457.9 MiB)
>         RX errors 0  dropped 0  overruns 0  frame 0
>         TX packets 967912  bytes 170822532 (162.9 MiB)
>         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>
>> The LTE phones could have lower MTU and thus overcome PMTU problem.
>
> Should I reduce the MTU?!?
> Maybe I didn't understood what you mean...
>
> Thanks
> Luca Bertoncello
> (lucabert at lucabert.de)
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at:
> https://community.asterisk.org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users