[asterisk-users] Question on pjsip.conf and aors

[Joshua C. Colp]

On Fri, Feb 14, 2020 at 3:04 PM Dan Cropp <dan at amtelco.com> wrote:

> I have the following configuration…
>
>
>
> [aor3]
>
> type = aor
>
> max_contacts = 1
>
> remove_existing = yes
>
>
>
> [auth3]
>
> type = auth
>
> username = 1004
>
> password = SuperSecretProbation
>
>
>
> [1004]
>
> type = endpoint
>
> context = IS
>
> transport = transport1
>
> auth = auth3
>
> aors = aor3
>
> accountcode = 3
>
> dtmf_mode = rfc4733
>
> device_state_busy_at = 2
>
> force_rport = no
>
> moh_passthrough = yes
>
> disallow = all
>
> allow = ulaw
>
> acl = acl1
>
>
>
>
>
> When a register attempt is received, asterisk outputs…
>
> [02/14 12:53:29.870] WARNING[7883] res_pjsip_registrar.c: AOR '1004' not
> found for endpoint '1004'
>
>
>
> If I change the aor3 to be 1004, everything works.  As in [aor3] becomes
> [1004] and in the endpoint change aors = aor3 to be aors = 1004
> Is there a setting I’m missing to allow the endpoint named 1004 to use an
> auth that doesn’t have the same 1004 name?
>

There isn't a configuration option. AOR is a SIP concept, and in fact when
you send a REGISTER you state which AOR you are registering to. Your
REGISTER is therefore saying "add me to AOR 1004". Since it's not saying
"add me to aor3" it doesn't work. Some devices allow you to specify while
others just assume that everything uses your username.

-- 
Joshua C. Colp
Asterisk Technical Lead
Sangoma Technologies
Check us out at www.sangoma.com and www.asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20200214/6d6aef84/attachment.html>